AIX双机+HACMP+SYBASE集成手记（国外英文资料）.docVIP

AIX双机+HACMP+SYBASE集成手记（国外英文资料） In this paper, by chendf1983 contribution Doc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. AIX dual machine + HACMP + SYBASE integrated hand 1. OS 2. Define /.profiles and tcpip (and edit /etc/hosts, plus /.rhosts file) 3. 定义 tty 芯跳线 (1) 终端线与各自主机终端的 S1 口相连 (2) 两主机间 S3 口互连(S3 口为标准芯跳口) (3) 装完 OS 后，两主机应已自定义了各自的 S1 口，用 lsdev -Cc tty 可见输出如下： tty0 Available 01-S1-00-00 Asynchronous Termind (其中可见 S1 表示此 tty 与 S1 口相连) (4) 现定义芯跳口与 S3 口 smit-tty-add a tty-rs232-Sa2 Available 01-S3 standard I/O serial port-定义 port number=0 (5) 在两主机上都定义完 S3 芯跳口后，用 stty 证实该两个芯跳口之间能否正常通信 在 A 机上输入命令 stty/dev/tty1,回车后提示符进入等待状态 再在 B 机上输入命令 stty/dev/tty1,回车后 A 机输出同一信息 在 B 机上输入命令 stty/dev/tty1,回车后提示符进入等待状态 再在 A 机上输入命令 stty/dev/tty1,回车后 B 机输出同一信息 4。 Do raid (only) on a host computer (1) define all physical Disk attributes smit dev - SSA raid arrays - change/show the use of an SSA physical Disk - ssa0 - choose physical Disk - custom properties (Array candidate Disk/Hot spare Disk/Aix system Disk) (2) to raid smit dev - SSA raid arrays - add an SSA raid Array - ssa0 - raid5 - define Member Disk and Enable Hot spare (3) to examine the completion status smit raid dev - SSA raid arrays - list the status of all defined SSA raid arrays. 5. Establish volume group and makes the function of sharing the resources * lsdev - Cc pdisk view physical disk * lsdev - Cc disk check logical disk * LSPV view all volume group * * LSVG view LSVG -o view activity volume group (1) after the completion of the raid on a two machine use the lsdev - Cc disk to see logical disk, if inconsistent, with rmdev - dl hdisk * (*) 0 delete all except hdisk0 logical disk, reoccupy CFGMGR heavy equipment, are two machine will correctly identify OS disk hdisk0 and logical disk raid hdisk *, in addition, also with the LSPV command output logic in both machine set, including hdisk0 volume group