AltiumDesigner学习笔记（国外英文资料）.docVIP

AltiumDesigner学习笔记（国外英文资料） First, the principle diagram parameter setting Tool-setup schematic diagram; DXP - first option; The right click - option; 1, 1 General Settings: Schematic - General; 1, 2 grid Settings: Grids; Design-document options; Look - grid Unit 1: Default - Units Design Settings: design-document options; Empty space right click - option - document option; Templates, options, grids, grid, etc The drawing principle diagram is to open the automatic capture electrical node, the drawing principle diagram element library closes the capture grid function Local amplification circuit diagram: view -workspace panel - the sch-block circuit; Empty space right-workspace panel - the sch-block circuit; Principle diagram design process: Start the schematic editor - create project - the principle diagram of the new file - set drawings - planning and design level - place component - edit adjustment principle diagram -- - check the schematic diagram - simulation Output report - print, output. Component library load: 6, 1 direct loading component library: design-browse library - Libraris (direct loading) The editor right library; The system - the library; Libraris -- installation -- find the file directory -- close. Search load: search on the right side of the editor. Tools - discover devices; Right-clicking on the empty space -- finding the device; Enter keywords (available *) in the search library 3 component library load component: design-browse library - Libraris. The editor right library; The system - the library; The second line selects the library name - the third line search element - the fourth line double-click; First line of Place... Can be placed. Element add package: double-click component-model-add - browse - mask search. Moving components: left-click and press movement; Drag the element (thread together) Ctrl + left click and drag. Rotation: space (inverse) shift + space; Flip: x (left and right) y (up and down) 10, quick and paste: copy or cut to clipb