浅议柱梁板同时浇筑(国外英文资料).docVIP

浅议柱梁板同时浇筑(国外英文资料) Shallow column beams are cast at the same time Date of collection:Introduction: Yang zuolong (1973), male, engineer, inner river vocational technical college, sichuan inner river 641000 Yang Zulong Pick to: the brief introduction of the advantages of column beam slab casting method at the same time, based on the detailed analysis and expounds the deficiency of the method, pointed out that the existence of pouring control at the same time Difficulty coefficient increases, maintenance difficulties, carbonization degree is deep, easy to cause the defects such as collapse, put forward to guarantee construction quality and reduce safety accidents, unfavorable use this method. Keywords: simultaneous casting, defect, strength and strength Middle image classification number: TU755. 6 document identification code: A Column beam slab construction at the same time, through the floor after alignment positioning, for frame column rebar tie, then the frame beam, plate supporting system and for the template, then the tie beam steel and installation, at the same time of steel plate and pipe network of frame column template installation, the last column beam slab concrete one-time casting. This kind of construction technology in the practical operation has many advantages, can speed up the construction schedule, construction enterprise organization construction, reduce the construction cost, and beam-column node better visual quality. In practice, the beams and columns of the beams are made of the concrete and the concrete observation quality is better. Therefore, someone put forward: when the pillars high strength grade of concrete strength grade of concrete beam plate is less than the secondary (10 mpa), can consider beam-column node concrete beam slab concrete is poured together with [1]. Column and beam slab should be respectively by the C40 concrete strength and C25 or C45 and C30 design, namely the strength is not greater than level 3, whether in t