施工员试题精选(国外英文资料).docVIP

施工员试题精选(国外英文资料) An anthology of the workers questions Chinese Internet test responsibility editor: wind fire Thea update time: June 18, 2012. One, single topic: The slope of the slope is l: 0.25, the width of the base is 800mm, and the depth is 2m (c). A 800 B, 1300, C, 1800, D, 800 The maximum size of the gravel is not to exceed the thickness of each layer (A). A 2/3 B l over 2 C 2 over 5 D 1/3 The axis of brick masonry allows for the deviation of (D) mm. A 20 B 15 C 12 D 10 Foot pallet should be more than (B) mm when applied to be laid. A 200 B 300 C 400 D 500 One of the quality requests of electroslag pressure welding is that the axis deviation should not be greater than (D) steel diameter and not greater than 2mm. A 1/2 B l / 4 C l / 8 D 1 / lO The spacing between the end of the steel bar and the beginning of the steel bar should not be less than the diameter of the bar. A 15 B 12 C 10 D 8 The three main working parameters of the crane are (C). The power of A motor, rising height, height of work B rise, work amplitude, maximum weight C starting weight, lifting height, working range D lifting height, working range, motor speed To control the smoothness and vertical degree (C). A hanging line B is made of grey cake, and the dash is layered and it is layered The paint brush should be applied (C). A is dips in each brush B with A long brush c. D to besmear to brush When the slope of the roof is within 3 to 5 percent of the grade, the section (C) roof is tiled. A parallel B is perpendicular to c or perpendicular to D The construction seam of the wall should stay above the surface of the floor and not be less than (A) mm above. A 300, B 200 C 150 D 120 It is advisable to use two-step feeding method in winter construction. The water temperature may not exceed (D) ℃ A 95 B 90 C 85 D 80 The construction is divided into two construction processes. Before construction, who should be prepared for one day, each construction process takes four days, in turn, the construction