计算机联锁工程设计(毕业设计).doc

摘 要 计算机联锁系统是保证行车安全的信号基础设备，必须保证工作可靠，并符合“故障—安全”原则。实现联锁的基本功能，完成列车进路建立、锁闭、解锁、道岔控制、信号机控制，完成轨道电路和信号设备状态的监督，实现特殊的联锁功能，确保列车进路正确和列车运行的安全。—酒泉站的上行咽喉，设计内容包括：信号平面布置图，该图能正确反映计算机联锁系统室外主要设备的布置情况，主要完成道岔、警冲标、信号机坐标的计算并确定其位置；双线轨道电路图，站内采用25Hz轨道电路，完成轨道电路的极性配置、扼流变压器的设置以及送受电端的布置；联锁表，包括基本进路的选择、敌对信号的确定、轨道区段侵限检查等；电缆径路和电缆网络图，根据公式计算电缆长度，选择电缆径路以及计算所需芯线数；系统结构图，可以了解所采用的的系统硬件构成以及其工作原理；接口柜排列表，可以反映出各个设备所属的组合以及驱动电路和采集电路所需的继电器类型；室内布置图，即室内各种设备的布置情况。 关键词：计算机联锁；极性交叉；联锁表 Abstract Computer interlocking system ensure the safety of traffic operation signal infrastructure so it must ensure working reliably and according to the “fail-safe” principle. The basic function of the interlocking is to create, lock, release, switch control, signal control the completion of the train route, to complete the supervision of the state of track circuits and signaling equipment, and use special interlocking rail system to ensure the correct of the train route and the safety of the train operation. The design selected for a virtual train station—Jiuquan station up direction throat, the design elements includes. The signal layout map, which accurately reflect the setting circs of the main outdoor facilities, the main task to complete are the switch, police marked red and the calculation of the coordinates of the signal and determination of their locations. Double rail track circuit map, the station uses 25Hz track circuit, to complete are the track circuit polarity configuration settings, impedance transformer and the arrangement of the end of sending or receiving power console. Disk map, including the cell types of selection and the arrangement of the various buttons. Cable pathways and cable network, according to formula to calculate the length of cables, select cable pathways and calculate the required number of cored wire. We can understand the system hardware as well as its working principle by using system structure picture. The interface cabinet row of the list can reflect each device belongs to the portfolio and the