ROUTEFinalExam.docVIP

ROUTE Final Exam CCNP 6.0 2012 100% 1. How do EIGRP routers establish and maintain neighbor relationships?by exchanging neighbor tables with directly attached routersby comparing known routes to information received in updatesby exchanging hello packets with neighboring routersby dynamically learning new routes from neighborsby exchanging routing tables with directly attached routers 2. The IPv6 autoconfiguration feature enables a PC to automatically connect to an IPv6 network. What type of IPv6 address allows a PC host to send a router solicitation message requesting a prefix for stateless autoconfiguration?link local addresssite local addressaggregatable global unicast addressloopback addressIPv4-compatible addressflow-label address 3. During an interview, the company IT manager mentions that the company has two critical communication links to its main supplier. These links require an uptime of 24/7. Which part of the PPDIOO process is most affected by this information?implementation phasedesign phaserouting protocol selectionprototype design plan 4.Refer to the exhibit. The RIP routes must be injected into the OSPF domain. Which command will perform external route summarization?RTA(config-router)# summary-address 172.20.0.0 255.255.0.0RTB(config-router)# summary-address 192.168.16.0 255.255.252.0RTB(config-router)# area 1 range 192.168.16.0 255.255.252.0RTA(config-router)# area 1 range 172.20.0.0 255.255.0.0 5.Refer to the exhibit.access-list 111 permit ip 10.0.0.0 0.255.255.255 anyroute-map net-10 permit 10match ip address 111set interface FastEthernet 0/1Where would the system administrator apply the above configuration to establish policy-based routing that directs packets from the 10.0.0.0/8 network through the R2 router to the Internet?RTA interface Fa 0/0RTA interface Fa 0/1RTB interface Fa 0/1RTB interface Fa 1/0R2 interface Fa 0/0R2 interface Fa 0/1 6. How does OSPF exchange routing updates when the passive-interface comma