MXQMultidisplaylinuxdemoV.docVIP

?????Master Page for Page 1  i.MX6Q Multi-display Linux Demo Application Note, Rev. 1  PAGE 10 Freescale Semiconductor Freescale Confidential Proprietary Freescale Internal Use Only Preliminary—Subject to Change Without Notice  i.MX51 Power Up Sequence Application Note, Rev. 0 Freescale Semiconductor  PAGE 9 Freescale Confidential Proprietary Freescale Internal Use Only Preliminary—Subject to Change Without Notice Freescale Semiconductor Document Number: ANnnnn Application NoteWhite Paper Rev. 1, 10/2012 Freescale Semiconductor, Inc. _______________________________________________________________________ Freescale Confidential Proprietary Freescale Internal Use Only Preliminary— Subject to Change Without Notice i.MX6Q Multi-display Linux Demo by JohnLi(R64710)GSM FAE Freescale Semiconductor, Inc.Shanghai, This application note shows how to build the multi-display demo on i.MX6Q sabreSD board with linux BSP. Contents  TOC \o 2-2 \h \z \t Heading 1,1  HYPERLINK \l _Toc338196036 1 Hardware/Software resource.  PAGEREF _Toc338196036 \h 2  HYPERLINK \l _Toc338196037 2 Burn the demo image to the SDcard.  PAGEREF _Toc338196037 \h 4  HYPERLINK \l _Toc338196038 3 Run the multi-display demo  PAGEREF _Toc338196038 \h 6  HYPERLINK \l _Toc338196039 4 Run the 3D demo  PAGEREF _Toc338196039 \h 9   Hardware/Software resource. We need the follow items for the demo: Hardware: i.MX6Q SabreSD board: (Order not available on Freescale websit current, need to contact the disty). We recommend to use version(SCH-27392 RevB5, 700-27392 RevX8), which is TO1.2 mass production i.MX6Q chipset, You can get the model number from i.MX6Q chipset mark. The follow is its name rules. MCIMX6U@+VV$$%A Silicon RevRev 1.0ARev 1.1BRev 1.2C(Mass production)And the demo still be test on version(SCH-27392 RevB,