12.1inch-LQ121S1DG49检测标准.pdfVIP

Revision Rev. Date Mark -First edition Standards No:LDI-121SRA01 Isaka24-Nov-06 Records of Revision Contents of Revision Check Approval LDI-121SRA01-2 1. Scope - These incoming inspection standards shall apply to TFT-LCD modules supplied by Sharp Corporation to D-PEAK . 2. Inspection lot - Quantity per shipment lot is 1 inspection lot. 3. Incoming inspection condition 3.1 Lot judge condition Lot determination condition is determinated pass or fail using the following apply standard [Applicaton standard: ISO 2859-1] Sampling type : Single sampling type, Inspection level : Ⅱ Lot pass standard : AQL level: Major --- 0.4 Minor --- 1.0 - As for the sorting of major or minor, it shall be accordance with item defect/determination standard 3.2　Conditon of lighting inspection 【Cosmetic inspection】 【Cosmetic inspection】 ?Usage of ND filter 4. Criterion of Appearance Quality [ Permissible quantity: N, Average diameter: D (mm), Length: L (mm) ] ※1 The distance between the MODULE and the eyes of the inspector shall be 35cm or more. (ON State / B/L switch only) ※２ The distance between the MODULE and the eyes of the inspector shall be 35cm oya (ON State / For both B/L and panel switch) ※３ The inspection shall be conducted by using a single 20W fluorescent ｌａｍｐ for illumination MODULE and the eyes of the inspector shall be 35cm or more. (ON State / non-operation) [ Note ] External inspection apply range is by 1.0mm widthof the effective display area ０．１=Ｄ=０．５ Ｎ=４ ※３Dents on the polarizer/glass Ｌ=１０．０ Ｎ=４Scrathes on the polarizer/glass Ｌ=３．０　Ｎ=３　 ※３ ※１，２ backlight cell) ０．１=Ｄ=０．５　Ｎ=３ (in the polarizer / Lint Black Dust Items Condition of inspection External illuminance on the panel surface 300～700Lx（Standard 500Lx） Incoming Inspection for TFT-LCD Module Foreign material Ambient humidity Normal humidity（65±5％RH） Usage of ND filter As mentioned in the following 350ｍｍ（Check from front［θ＝0°］） Normal temperature（2