Tyco_terminal_crimp_specifications.pdfVIP

Application Specification 应用规格 114-106118 FEB 27, 2014 Rev.A2 TE Connectivity (Shanghai) Co., Ltd. No.1528 Gumei Rd, Building 5,Shanghai 200233 1 of 6 ? Copyright 2005 by Tyco Electronics Shanghai Co., Ltd. All rights reserved. * : Trademark Crimping Specification Power Triple Lock 新一代电源和信号连接器压接规格 1. Introduction This specification covers the requirements for application of Power Triple Lock Connectors. These connectors consist of receptacle and tab contacts which are installed in various receptacle and plug housings. The housings and contacts will accept a discrete wire size range of 0.34–3.30 mm2 [22–12 AWG]. 1. 导言 规范涵盖新一代电源和信号连接器应用的要求， 这些连接器由安装在不同公母壳体中的公母端子所组 成。外壳和端子所接受的离散电线尺寸范围是 0.34-3.30 mm2 [22–12 AWG] 。 2. Applicable Product Part Number 2. 适用产品料号 Description 描述 Part No. 料号 Wire Size 适用线型 mm 2 Insulation Diameter 缘外径 (mm) Contact Plating 端子电镀 Power Triple Lock Tab and Receptacle Contact 新一代电源和信号连接器 公母端子 1971779-( ) 1971780-( ) 1971781-( ) 1971782-( ) 1971783-( ) 1971784-( ) 1971785-( ) 1971786-( ) 1971787-( ) 1971788-( ) 1971237-( ) 1971238-( ) (AWG 22#~12#) 0.34～3.30 ?2.25～?4.25 Tin Plating Type 镀锡 Insulation Barrel 缘匣 Wire Barrel 导体匣 Contact Stabilizer 端子稳定片 Receptacle Contact 母端子 Tab Contact (公端子) Insulation Barrel 缘匣 Wire Barrel 导体匣 Contact Stabilizer 端子稳定片 Application Specification 应用规格 114-106118 FEB 27, 2014 Rev.A2 REV.A2 2 of 6 3. Reference Material 3.1 Drawings Customer Drawings for specific products are available from the service network. The information contained in Customer Drawings takes priority if there is a conflict with this specification or with any technical documentation supplied by Tyco Electronics. 3.2 Specifications Design Objective 108–106118 provides expected product performance requir