A master-surface to master-surface formulation for beam to beam contact. Part II Frictional interaction.pdfVIP

Accepted Manuscript A master-surface to master-surface formulation for beam to beam contact. Part II: Frictional interaction Alfredo Gay Neto, Paulo M. Pimenta, Peter Wriggers PII: S0045-7825(16)30321-8 DOI: /10.1016/j.cma.2017.01.038 Reference: CMA 11323 To appear in: Comput. Methods Appl. Mech. Engrg. Received date : 5 May 2016 Revised date : 21 December 2016 Accepted date : 31 January 2017 Please cite this article as: A.G. Neto, et al., A master-surface to master-surface formulation for beam to beam contact. Part II: Frictional interaction, Comput. Methods Appl. Mech. Engrg. (2017), /10.1016/j.cma.2017.01.038 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. A MASTER-SURFACE TO MASTER-SURFACE FORMULATION FOR BEAM TO BEAM CONTACT. PART II: FRICTIONAL INTERACTION 1* 1 2 Alfredo Gay Neto , Paulo M. Pimenta Peter Wriggers 1Polytechnic School at University of S?o Paulo 2Leibniz Universit?t Hannover * Corresponding author: alfredo.gay@usp.br ABSTRACT Slender structures are commonly represented using beam models. When addressing the contact between them, usually one has to adopt specific formulations, wherein the beam is represented by a 3D curve