路由器的备份与还原.doc

路由器有操作系统的时候的备份与升级 Routeren Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int f0/0 Router(config-if)#ip add Router(config-if)#ip address Router(config-if)#no shu Router(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)# Router(config-if)#exit Router(config)#cop Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy tftp: flash: Accessing t/lzh.bin... Loading lzh.bin from : !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK - 5571584 bytes] 5571584 bytes copied in 3.266 secs (390880 bytes/sec) Router#dir Directory of flash:/ 4 -rw- 5571584 no date lzh.bin 3 -rw- 5571584 no date pt1000-i-mz.122-28.bin 2 -rw- 28282 no date sigdef-category.xml 1 -rw- 227537 no date sigdef-default.xml bytes total bytes free) Address or name of remote host []? Destination filename [Router-confg]? lzh.bin .!! [OK - 620 bytes] 620 bytes copied in 3.197 secs (0 bytes/sec) Router# lzh#copy tftp: flash: Address or name of remote host []? Source filename []? lzh.bin Destination filename [lzh.bin]? Accessing t/lzh.bin... Loading lzh.bin from : !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK - 5571584 bytes] 5571584 bytes copied in 0.406 secs (3144376 bytes/sec) lzh#dir Directory of flash:/ 4 -rw- 5571584 no date lzh.bin 3 -rw- 5571584 no date pt1000-i-mz.122-28.bin 2 -rw- 28282 no date sigdef-category.xml 1 -rw- 227537 no date sigdef-default.xml bytes total bytes free) lzh#cop lzh#copy r lzh#copy running-config s lzh#copy running-confi