- 1、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
冷轧板带1450设计分析
学 号:
课程设计说明书
设计题目:0.41450mm冷轧板带钢设计
学生姓名:
专业班级:
学 部:材料化工部
指导教师: 助教
2015年12月3日
摘 要
冷轧产品尺寸精度高,表面光滑,内部各项性能良好,其主要因素是排除了热轧中温度这一工艺因素的影响。利用钢在高温时变形抗力低和塑性良好的特点,在高温状态下进行加工变形,有利于节约能源,容易获得各种形状,但高温加工变形过程中的温度不是固定不变的,如果加工过程中钢的温度不均匀,则影响加工精确度;而高温状态的氧化,使得热轧钢板表面质量较差,冷轧能使金属内部颗粒破碎并均匀化,附加一定的热处理工艺,便能得到良好的性能,因此在产品尺寸的精确度,表面质量、性能各方面,冷轧板带钢都比热轧板带钢强。在特定的冷轧机上还可以轧制厚度为0.001mm的极薄钢板,这对于热轧来说是不可能的。
本次设计使用2.0x1450mmQ240坯料经五道次轧制总压下1.6mm轧出0.4x1450的薄板材,并且对轧机、轧辊、电机受力等进行了校核。工艺制度均符合生产要求。
关键词 冷轧;热轧;酸洗;脱脂
Abstract
The cold rolled products with size high precision, smooth surface, internal performance is good. Its main factors are ruled out in the hot rolling temperature of the process factors. When using steel in high temperature deformation resistance is low, and the characteristics of the plastic good, deformation under the state of high temperature processing, beneficial to save energy, easy accessing to a variety of shapes, But in the process of high temperature deformation temperature is not fixed, if in the process the temperature of steel uneven, influence machining precision; And the state of high temperature oxidation, make hot rolled steel plate surface quality is bad, Cold rolling can make the metal internal grain breakage and homogenization, additional heat treatment process, can get good performance, So in product size precision, surface quality, performance and manufacture steel strip are better than hot-rolled strip steel. In particular cold rolling machine can rolling thin steel plate thickness of 0.001 mm, it is impossible for hot rolling.
This design uses 2.0 x1450mmQ240 billet by five times rolling down 1.6 mm rolling out 0.4 x1450 thin plate, and the rolling mill, roll, such as motor bearing for checking. All conform to the requirements of the production process system.
Keywords cold rolling; hot rolling ;acid pickling ;degrease
目 录
课程设计说明书 i
设计题目:0.41450mm冷轧板带钢设计 i
学生姓名:李铁岭 i
摘 要 I
Abstract II
第1章 综述 1
1.1冷轧 1
1.1.1冷轧薄板综述 1
1.1.2冷轧的概念 1
1.2 冷轧薄板的生产过程 1
1.3冷轧
文档评论(0)