POS 58 印机安装流程.docVIP

POS 58 打印机安装流程 所需设备: POS打印机一部 (58MM宽热敏打印机) 打印机电源线 打印机数据线(大口USB) 驱动程序文件 安装流程 接好打印机, 包括电源线, 数据线, 并打开打印机电源开关, 确认电源指示灯亮. 如果是第一次安装该打印机, 还应确认打印机工作正常. 方法如下: 关闭打印机电源 安装打印纸, 注意打印纸正反面. 有一面是打印不出内容的. 按住送纸键(通常英文标志为FEED)不松, 打开电源 保持送纸键按下状态约两秒, 松开该键. 此时打印机应该会打印一份自检单. 如果出纸但不打印, 检查打印纸是否正反面装正确. 安装打印机驱动程序 确认打印机是开机状态 确认操作系统是windows系列且不是win7(注: win7驱动可能安装不正常) 运行通用的驱动程序(以XP为例) 双击此程序 点击”继续” ”接受协议”并”继续” 使用默认的安装目录并点击”继续” 点击”安装” 选择操作系统, 通常驱动程序会自动检测并正确选择,如果没有(比如WIN7), 可尝试XP或VISTA, 然后点击下一步. 重要:去掉这里的”设为默认打印机”的勾选状态,最终应如图所示, 左边的框显示为空白. 点击上图中的”结束”按钮, 此时因为系统可能会查找设备并安装驱动程序, 操作界面可能会有一小段时间的假死. 等待就行了 如果系统装有360或其它杀毒软件阻止安装. 更改为允许安装.如下图所示 中间如果出现驱动安装界面, 一路选择”下一步” 或”OK” 或”同意”, 直到驱动程序安装完成并显示 在控制面板里找到”打印机与传真” ,并点开 找到与之前安装时同名的打印机, 通常默认是”XP58-II”, 实际名称参考上面第”v”步里的图片, “设为默认打印机”下方文本框里的名称. 右键-属性-端口, 选择任意的描述为”Virtual printer”的”USB00..”端口. 特别注意:如果有多个USB00X端口.选择”打印机”一栏为空的端口, 如果发现如下图所示,仅有的USB00X端口后面打印机已经有文字描述, 先确认如果这台打印机并没有实际安装.回到”控制面板-打印机和传真”页面, 删除对应名称的打印机(例如下图中是JS-58III). 回到”常规”页面. 打印测试页, 如果成功打印, 表示驱动安装成功.如图: 牢记上图中打印机的名称, 例如上图中为”XP-58II” section of the Department of project management; Project documents and information: Project Engineering Department; Materials and equipment: material supply projects; Security controls: the project Department of safety and security; Construction machinery: Project Engineering Department; Financial: Project Management Department of finance; Security and fire services: project security. 3.3.5 management representative and project manager in this item specifies that the Chief Engineer is the management representative, responsible for the operation of quality management system and supervision, regardless of how his other responsibilities, should have a clear mandate to: ensure that the quality management system is implemented and maintained; The running of the quality management system to the project manager, including needed improvements; Always be aware that the customers needs and requirements. 3.4 3.4.1 project management review should be an annual review of its quality