车间半成品管理办法.docVIP

车间半成品管理办法 生产部下料钣金车间生产好相关柜体半成品后,编制相关交接清单,清单上需清楚写清项目名称和柜体代号,项目名称和柜体代号必须与相应的销售合同一致; 生产部总装车间指定相关区域摆放钣金车间生产好的相关半成品,区域须做好标识; 生产部半成品仓仓管员接到钣金车间的柜体半成品配件后,要求其按指定区域摆放,并认真核对实物与相应交接清单数量是否一致, 生产半成品仓仓管员核对好相关钣金车间送料后,按交接清单打印相关标签(标签格式见后面附图) 粘贴在相应的半成品上,并开具半成品入库单,交质检部检验; 质检部接到半成品仓仓管员半成品入库单后,到存货区域认真核对标识是否正确,半成品摆放是否按要求摆放,以及核对相关的半成品质量是否符合要求; 总装车间需要使用半成品时,开单到半成品仓领料,领料时必须核对所料半成品是否与需求一致, 并且相关半成品是否具有完整正确的标识,如没有完整的标识总装领料人员必须要求半成品仓仓管员进行补贴; 质检部在总装过程巡检中,也应能注意相关半成品标识是否存在和正确,如有差错按不合格品处理,并要求相关人员书写造成原因和预防措施. 依据客户的需求出货. 流程图 标签样式: caoporn 2287uwLovS3N the provisions of Hunan province safety production supervision and management responsibilities (Hunan Zhengban made 2013 No. 4), resolutely implement the safety production of the party with responsibility, a pair of responsibility. Two is issued safety production administration and inspection to promote the responsibilities bear safety production supervision departments strictly and effectively assumed responsibility. The three is the establishment of enterprise production safety hidden With self correction self reporting system, promote the enterprises to implement the main responsibility for production safety. The four is the introduction of strengthening county safety production supervision