油轮特涂工艺(Marine_line_America)中英文版.doc

特涂工艺 CARGO TANK LINING PROCEDURE 第1页  共31页 CONTENTS 目录 Page 1. General 总则 32. Coating System 油漆配套 63. Technical Matters 技术事项 64. Working Procedure For The Cargo Tank Coating 特涂施工程序 135. Detail Process 详细工艺过程 146. Painting Scheme 油漆明细表 257. Inspection 检查 258. Specific Requirements For Coating Material 油漆原料的特殊要求 269. Coating Sequence 油漆程序 2710. Holiday Detection 针孔测试 2911. Heat Curing of The Coating System 热固化 2912. Salt Water Test Repair of Defects After Completion 海水浸泡试验及修补 3013. Acceptance 完工交验 3114. Safety 安全 32  特涂工艺 CARGO TANK LINING PROCEDURE 第2页  共31页 1. General 总则 1.1 The two components SILOXIRANE based coating material shall be applied to cargo tank, cargo slop tank and residual oil tank, excluding their outfitting. 本双组分油漆的基料为SILOXIRANE，应用于货油舱、货油污油舱和货油泄放舱，不包括它们内部的舾装件。 Tank 舱Quantity 数量Cargo tank货油舱xxSlop tank 货油污油舱xRes. oil tank 货油泄放舱x 1.2 Tank coating shall be carried out after the completion of hot work in the tanks and adjacent areas and tank testing. 在舱内和舱体（六面体）周围火工作业结束及检查通过以后进行特涂施工。 1.3 Tank coating procedure shall be decided in accordance with the builder’s practice, paint manufacturer’s recommendation and owner’s final approval. 特涂工艺的制定要遵照施工方的惯例和涂料制造商的建议并经船东认可。 1.4 Surface preparation and coating shall be carried out after the erection and the completion of outfitting works. 表面预处理和油漆必须在上船台（或下坞）和舾装工作结束以后进行。 1.5 Any misapplied shop primer or other coating shall be completely removed during the secondary surface preparation. 任何误涂的车间底漆或其它油漆必须在二次除锈过程中清除。 1.6 This Coating Procedure shall together with the MarineLINE Application Procedure be the only valid documents for all parties involved in the tank coating operation. 本特涂工艺结合Marine Line施工工艺作为从事本特涂作业各方的唯一有效工艺文件。 1.7 The tank coating materials shall be stored, mixed, applied and cured in strict observance of the requirements and recommendations of the c