点滴瓶盖注塑模设计教案分析.docVIP

摘 要 毕业设计是对点滴瓶盖的设计及其模具设计，重点是对点滴瓶盖的模具设计。 通过对点滴瓶盖结构及相关参数特征分析，设计出该塑件的模具。在整个模具设计过程中，涉及到了塑件的结构设计、注塑机和模架的选择及注塑机的一些重要工艺参数的校核，并详细叙述了模具设计中的分型面设计、浇注系统设计、成型零件设计、侧抽机构设计和冷却系统设计以及模具的各种零件的结构设计。而在此基础上又增加脱螺纹机构的设计，在整个设计中的重点就是侧抽机构和脱螺纹机构。 在模具设计过程中，采用了UG、AutoCAD等的设计分析软件，采用这些软件进行设计分析，优化了设计的参数和缩短了设计时间，提高了设计效率。 通过整个模具设计，本人已经能够熟练地使用当前常用的设计分析软件，学会了根据计算或者依据经验选择一些参数, 对模具设计经历了由接触到熟悉再到独立做出一套模具的过程，对模具设计的各个流程有了很熟悉的了解，对一些模具的标准也有了一定的了解，而付出大部分时间的侧抽的设计也取得了比较不错的效果.在本次设计之后，对模具的各个方面都有了一个全面的了解，为以后打下坚实的基础。 关键词：点滴瓶盖,模具设计,分型面 Abstract Graduation design is the design of remote shell and its die design, the focus is on the remote control on the shell mold design. Based on the remote control on the analysis of characteristics of shell structure and related parameters, design the plastics mold. In the mold design process, involving the structure of the design, selection of injection molding machine and mold frame and check some important process parameters of injection molding machine, and describes the parting surface of mould design in detail design, gating system design, molding parts design, the side pumping mechanism design and cooling system design and the structure of various parts of the mold design. And on the basis of the increase off thread mechanism design, in the whole design of the key is the side pumping mechanism and take off thread mechanism. In the process of die design, using the UG, AutoCAD and other design analysis software, using the software to design analysis, optimize the design parameters and shorten the design time, improve the design efficiency. Through the mould design, I have been able to skillfully use the current common design analysis software, learned according to the calculation or choose some of the parameters on the basis of experience, familiar with mould design experienced by exposure to to make a set of independent mould process, familiar with mould design for each process with understanding, on some mould standard also had certain understanding, to pay