《Cable Pinouts》.pdfVIP

Cable Pinouts C This appendix lists the cables and connector pinout assignments for the cables used with the ERX-700 series and ERX-1400 series. Topic Page SRP I/O Module C-1 CT1 and CE1 I/O Modules C-4 SRP I/O Module The SRP I/O module provides two management ports. You can connect a console directly to the RS-232 serial port using a shielded straight-through cable with a female DB-9 connector on one end and a male DB-25 with a crossover adapter on the DB-25 end. This port is called the serial port, the RS-232 port, or the console serial port. Figure C-1 shows the location of the serial port and the sequence of the pins in the RS-232 connector. C-2 APPENDIX C Cable Pinouts Figure C-1 SRP I/O module serial port Table C-2 lists the pinout for the serial cable’s RS-232 connector. Table C-1 SRP I/O