皮江法炼镁冶炼用作燃煤固硫剂的试验研究.pdf

皮江法炼镁冶炼用作燃煤固硫剂的试验研究.pdf

  1. 1、本文档共59页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
皮江法炼镁冶炼用作燃煤固硫剂的试验研究.pdf

摘 要 本文通过对镁冶炼渣的固硫型能进行研究得到以下结论: 1)镁冶炼渣的化学成分随其粒度变化而变化,粒度越大,MgO 含量越高,CaO 的含 量越低,反之亦然。同时,随着粒度的加大,SiO2 的含量不断减小,而F 的含量却不断加 大; 2 )通过XRD 的物相分析可知,镁冶炼渣中的Ca 主要以Ca SiO 的形式存在。并且, 2 4 Ca SiO 以β 相和γ 相两种物相形式存在,且随着粒度的变化这两种物相的含量也不同; 2 4 3 ) 在一定范围内,O2 含量高时有助于固硫反应。本试验中,当O2 的含量在5%时, 其最终的固硫率能比O2 含量在1%高出9 个百分点; 4 ) 不同粒径的镁冶炼渣其反应速度和最终的固硫率也不同,这不仅与其反应的表面 积有关,也与其化学成分有关。将大颗粒的镁冶炼渣磨细成小颗粒,其反应速度会加快, 但最终的固硫效果却几乎不变; 5 ) 温度对镁冶炼渣的固硫速度和最终的固硫率都有影响,通过本试验得出,当温度 在大概900℃时,镁冶炼渣具有较快的反应速度和较高的固硫率; 6 ) 水处理和蒸汽处理对镁渣的固硫率都具有提高作用,这是因为水处理后或蒸汽处 理后,生成了更多的Ca(OH) ,且具有更大的比表面积和孔隙度。 2 文章在最后结合反应前后的物质的孔隙度和比表面积的变化解释出现相关结果的原 因,并对镁冶炼渣未来用作固硫剂的继续研究提出了自己的观点和建议。 关键词:皮江法,燃煤,镁冶炼渣,固硫 I Abstract This article can be devided to two part:the summarization of literature and the experiment.The summarization of literature introduce the damage and the pollution situation of SO2 in the mainland of China.And the summarization of literature also introduce some desulfurize methods widely used in the industry boiler.The situation of magnesium production in the mainland of China and the field that magnesium can be used are also included in the summarization of literature. In the experiment section,this article introduce the equipment and the sample as well as the path of this experiment first.Secondly,the author of this article griddle the samples which was sampling by scientific method.Of course,those samples are the same weight.Thirdly,The author measured the weight and analysis the component and the configuration of the magnesium smelting slag which was in different diame

文档评论(0)

chengben002424 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档