模具设计2D检查流程表.xlsVIP

Sheet1 设计室2D装配图检查表 2D Assembly Drawing Checklist 项目名称： 产品名称： 模具编号： Project Name: Component Name: Tool Number: 项目Items 内 容 Content 结 果 Result 1.模胚检查 Mold Base Is thickness of A and B plates correct? A、B板及其他板厚是否正确 □ 是 (Y) □ 否(N) Are the pokects in A B plates correct? A、B板开框是否正确 □ 是 (Y) □ 否(N) Is material for all mold plates identified? 模胚各模板是否标明材质 Are guide pins and bushings to standard, or their numbers ok? 导柱导套是否标准,编号是否正确 Are side lock and ejector guide pins to customer specification? 边锁，中托司等是否按照客户要求 Are all dimensions for moldbase ok? 模胚其它尺寸是否正确 Are there dowel pins? If so, are their types ok (for B plate, spacer and back plate) ? 模具是否有增加定位销,销钉规格是否正确（B板、方铁、底板） Is dimension of moldbase chamfer identified, or is there any datum identification? 是否有标明模胚边C角大小,是否有模胚基准符号 2.产品图检查 Component Drawing Are component drawings latest? 产品图是否为必威体育精装版产品图 Are there components symmetrical with each other and identified with mirror x shrinkage? 产品是否有镜像且有标示“mirrorx缩水率” Are components with shrinkage, or is the shrinkage correct? 产品是否有乘缩水及缩水率是否正确 Is number of cavity correct? Are all cavities identified with number? 产品穴数是否正确，多穴数是否有字码区别 Is the component datum consistent with customers? 产品基准和客供产品图基准是否一致 Is the componnent datum consistent with that on 3D? 产品基准与3D分模图基准是否一致 Is the lay out ok? Are there components the same as or rotated from each other? 排位是否正确，是否为旋转复制关系 Are height datum of all views and slides etc. consistent? 每个视图及行位等的高度基准是否一致 3.前/后模检查 Cav/Core Is material labeled on cavity and core? 前后模仁上是否有标明材质 Have cavity and core been made in different color and overlaid to check symmetry? 前后模是否有变色镜像,重叠检查 Is there clearance for inserts