DINISOGB紧固件标准对照.xls

Sheet3 Sheet2 Sheet1 德国标准和国际标准、中国标准中英文对照表 序号 德国标准 中文品名 英文品名 国际标准 中国标准 Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard DIN1 圆锥销 taper pins ISO2339 GB117 DIN7 圆柱销 parallel pins ISO2338 GB119-86 DIN84 开槽圆柱头螺钉 slotted cheese head screws ISO1207 GB65-85 DIN85 开槽盘头螺钉 slotted pan head screws ISO1580 GB67-85 DIN93 单耳止动垫圈 tab washers GB854 DIN94 开口销 split cotter pins ISO1234 GB91 DIN95 开槽半沉头木螺钉 slotted raised csk head wood screws GB101 DIN96 开槽半圆头木螺钉 slotted round head wood screws GB99 DIN97 开槽沉头木螺钉 slotted countersunk head wood screws GB100 DIN125-A 平垫 plain washers ISO7089 GB97.1-85 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-85 DIN126 ISO7091 DIN127-A 重型弹垫 spring lock washers,tang ends GB7244 DIN127-B 标准弹垫 spring lock washers,square ends GB93-87 DIN128-A 鞍形弹垫 single coil spring lock washers GB7245-87 DIN137-A 弹簧止动垫圈 curved spring washers DIN137-B 波形弹垫 wave spring washers GB955 DIN186 T型方颈螺栓 T-head bolts with square neck GB37-88 DIN188 T型双接头螺栓 T-head bolts with double nip DIN258 螺纹圆锥销 taper pins with threaded end ISO8737 DIN261 T型头螺栓 T-head bolts DIN315AF 蝶型螺母(美制) wing nuts amercia form DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-88 DIN316AF 蝶型螺钉(美制) wing screws amercia form DIN317DF 蝶型螺钉(德制) wing screws germany form DIN319 圆球型盖型螺母 ball knobs DIN404 开槽带孔球面圆柱头螺钉 slotted capstan screws GB832-88 DIN417 开槽长圆柱端紧定螺钉 slotted set srews with full dog point ISO7435 GB75-85 DIN427 开槽平端紧定螺钉(半牙) slotted set srews with chamfered end ISO2342 GB73-85 DIN431 小六角特薄细牙螺母 pipe nuts with thread GB808-88 DIN432 外舌止动垫圈 external tap GB856-88 DIN433 小垫圈(用于圆柱头螺钉) washers for cheese head screws ISO7092 GB848-95 DIN434 方斜垫圈(U型) square taper washers for U-section GB852-88 DIN435 方斜垫圈(I型) square taper washers for I-sections DIN436 方垫圈 square washers DIN438 开槽凹端紧定螺钉 slotted set with cup point ISO7436 GB74-85 DIN439 六角薄螺母 hexagon thin nuts ISO4035 GB6172-86 细牙六角薄螺母 ISO8675 GB6173-86 DIN440 木螺钉专用垫圈 rounds washers for wood constructions ISO7094 DIN443 密封帽 sealin