AS 3715-2002 R2017国外国际英文.pdfVIP

AS 3715—2002 A S 3 7 1 5 Australian Standard™ Metal finishing—Thermoset powder coatings for architectural applications of aluminium and aluminium alloys This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved on behalf of the Council of Standards Australia on 14 June 2002 and published on 27 June 2002. The following are represented on Committee MT-009: Australasian Institute of Metal Finishing Australian Chamber of Commerce and Industry Australian Industry Group Australian Paint Manufacturers’ Federation Department of Defence (Australia) Galvanising Association of New Zealand Institute of Materials Engineering Australasia New Zealand Abrasive Blasting Association Powder Coaters Association Society of Automotive Engineers Australasia Telstra Corporation The Royal Australian Chemical Institute Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about Standards can be found by visiting the Standards Australia web site at .au and looking up the relevant Standard in the on-line catalogue. Alternatively