【英语版】国际标准 ISO 12195:1995 EN Threshed tobacco — Determination of residual stem content 脱粒烟草 残茎含量的测定.pdf
- 2
- 0
- 2024-07-18 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 1995-09-14 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO12195:1995是关于收获后的烟草中残留茎干含量的测定标准。它是一个国际标准化组织(ISO)制定的国际标准,旨在为烟草行业提供一套统一、规范的方法,用于评估和监测收获后的烟草的质量和完整性。该标准规定了使用特定的化学分析方法来测量收获后的烟草中残留的茎干含量。
具体来说,ISO12195:1995标准包括以下步骤:
1.样本采集:根据一定的采样规则,从收获后的烟草中采集一定数量的样本。这些样本应该代表整个收获后的烟草批次的质量。
2.样品处理:将采集到的样品进行适当的处理,以便进行化学分析。这可能包括将样品破碎、磨碎或切割成适当的大小和形状,以便于分析。
3.化学分析:使用特定的化学分析方法,如重量法或质谱法,来测量残留的茎干含量。这些方法通常涉及将样品与适当的化学试剂混合,并通过测量反应后的重量或质谱数据来计算茎干含量。
4.结果解释:根据化学分析的结果,可以得出收获后的烟草中残留茎干含量的估计值。这个值可以用于评估收获后的烟草的质量和完整性,以及监测和改进收获过程的质量控制。
ISO12195:1995标准提供了一种可靠、精确的方法来测量收获后的烟草中残留的茎干含量,有助于评估和监测收获过程的质量控制,并为烟草行业的生产和质量控制提供重要依据。
您可能关注的文档
- 国际标准 ISO 12164-5:2023 EN Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES 空心的锥形接口与法兰接触表面—第5部分:AS、CS和ES类型的插芯.pdf
- 国际标准 ISO 12164-6:2023 EN 空心的锥形接头接触表面与法兰接触面—第6部分:类型AS、CS和ES的接收器类型AS、CS和ES的锥形接头类型 Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES.pdf
- 国际标准 ISO 12164-6:2023 EN Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES 空心的锥形接头接触表面与法兰接触面—第6部分:类型AS、CS和ES的接收器类型AS、CS和ES的锥形接头类型.pdf
- 国际标准 ISO 12165:2019 EN 注塑模具 压缩模、注塑模和压铸模的部件 相应术语和符号列表 Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols.pdf
- 国际标准 ISO 12165:2019 EN Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols 注塑模具 压缩模、注塑模和压铸模的部件 相应术语和符号列表.pdf
- 国际标准 ISO 12167-1:2023 EN 滑动轴承 带排水槽的静压滑动轴承 第1部分:带排水槽的油润滑滑动轴承的计算 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage g.pdf
- 国际标准 ISO 12167-1:2023 EN Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves 滑动轴承 带排水槽的静压滑动轴承 第1部分:带排水槽的油润滑滑.pdf
- 国际标准 ISO 12167-2:2021 EN 滑动轴承 带排水槽的静压滑动轴承 第2部分:计算带排水槽的油润滑滑动轴承的特征值 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain.pdf
- 国际标准 ISO 12167-2:2021 EN Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves 滑.pdf
- 国际标准 ISO 12168-1:2019 EN 滑动轴承 稳态条件下无排水槽静压滑动轴承 第1部分:无排水槽油润滑滑动轴承的计算 Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without d.pdf
- 国际标准 ISO 12197:2016 EN 伍德拉夫钥匙座铣刀 尺寸 Woodruff keyseat cutters — Dimensions.pdf
- 国际标准 ISO 12197:2016 EN Woodruff keyseat cutters — Dimensions 伍德拉夫钥匙座铣刀 尺寸.pdf
- 国际标准 ISO 12205:1995 EN 石油产品 确定中间馏分燃料的氧化稳定性 Petroleum products — Determination of the oxidation stability of middle-distillate fuels.pdf
- 国际标准 ISO 12205:1995 EN Petroleum products — Determination of the oxidation stability of middle-distillate fuels 石油产品 确定中间馏分燃料的氧化稳定性.pdf
- 国际标准 ISO 12208:2015 EN 空间系统 空间环境(自然和人工) 地球同步轨道长期观测到的质子通量和太阳质子通量统计模型置信度选择准则 Space systems — Space environment (natural and artificial) — Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statis.pdf
- 国际标准 ISO 12208:2015 EN Space systems — Space environment (natural and artificial) — Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences 空间系统 空间环境(自然和人工.pdf
- 国际标准 ISO 12209:2013 EN 气瓶 用于压缩呼吸空气的气瓶阀门的出口接口 Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air.pdf
- 国际标准 ISO 12209:2013 EN Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air 气瓶 用于压缩呼吸空气的气瓶阀门的出口接口.pdf
- 国际标准 ISO 12209:2013/AMD 1:2016 EN 气瓶 压缩呼吸空气气瓶阀的出口连接 修订 1:最大气瓶工作压力 500 巴以下的出口连接 Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder working pressure of.pdf
- 国际标准 ISO 12209:2013/AMD 1:2016 EN Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar 气瓶 压缩呼吸空气气瓶阀的出口连接 修订 1:最大气瓶工作压力 500 .pdf
最近下载
- 管线保护方案.pdf VIP
- DB5101T 13-2018 成都市智慧城市市政设施 城市道路桥梁基础数据规范.pdf VIP
- 变电站一次设备、二次设备巡视要点.pptx VIP
- 养老机构医养结合服务规范.pdf VIP
- 第11课 “韩信点兵”筛选法的实现 课件 2025-2026学年六年级上册信息技术浙教版.pptx VIP
- 基于Python的五子棋游戏设计.docx VIP
- 《岳阳楼记》的文言虚词.doc VIP
- Python语言与经济大数据分析知到智慧树期末考试答案题库2025年上海财经大学.docx VIP
- 初中英语英语完形填空100篇(二)配答案详解.pdf VIP
- 电梯制造项目可行性研究报告(参考范文).docx
有哪些信誉好的足球投注网站
文档评论(0)