【英语版】国际标准 ISO 12193:2004 EN 动植物油脂 通过直接石墨炉原子吸收光谱法测定铅含量 Animal and vegetable fats and oils — Determination of lead by direct graphite furnace atomic absorption spectroscopy.pdf
- 0
- 0
- 2024-07-18 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2004-01-14 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO12193:2004标准主要涉及动物和植物脂肪和油类的铅含量测定。该标准使用直接石墨炉原子吸收光谱法进行铅的测定。以下是对该标准的详细解释:
我们需要明确ISO12193:2004标准适用于动物和植物脂肪和油类,这些脂肪和油类可能是从各种来源获取的,例如动物肉、植物种子等。在这个标准中,铅含量是一个关键的检测指标,因为它可以反映出食品的污染程度。
该标准所采用的直接石墨炉原子吸收光谱法是一种化学分析方法,其基本原理是原子能态不稳定的元素在吸收光辐射后发生跃迁,回到低能级时将放出光子,这种辐射的光子就是原子吸收光谱。这个方法的基本过程包括将待测元素铅污染的脂肪或油样品加热熔融,将熔融物喷入石墨炉中使其原子化,通过测量辐射强度进而得出铅的含量。
这种方法在实践中可能受到许多因素的影响,如样品的纯度、浓度、样品的均匀性、仪器的性能等等。因此在实际操作中需要进行相应的预处理以确保测定的准确性。同时,也需要定期对仪器进行校准和维护以确保结果的可靠性。
ISO12193:2004标准提供了一种测定动物和植物脂肪和油类中铅含量的有效方法,对于食品安全和质量控制具有重要意义。
您可能关注的文档
- 国际标准 ISO 12164-4:2023 EN 空心的锥形接口与法兰接触表面—第4部分:类型T和U的接收器,用于类型T、TA和U的空心的锥形杆 Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U.pdf
- 国际标准 ISO 12164-4:2023 EN Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U 空心的锥形接口与法兰接触表面—第4部分:类型T和U的接收器,用于类型T、TA和U的空心的锥形杆.pdf
- 国际标准 ISO 12164-5:2023 EN 空心的锥形接口与法兰接触表面—第5部分:AS、CS和ES类型的插芯 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES.pdf
- 国际标准 ISO 12164-5:2023 EN Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES 空心的锥形接口与法兰接触表面—第5部分:AS、CS和ES类型的插芯.pdf
- 国际标准 ISO 12164-6:2023 EN 空心的锥形接头接触表面与法兰接触面—第6部分:类型AS、CS和ES的接收器类型AS、CS和ES的锥形接头类型 Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES.pdf
- 国际标准 ISO 12164-6:2023 EN Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES 空心的锥形接头接触表面与法兰接触面—第6部分:类型AS、CS和ES的接收器类型AS、CS和ES的锥形接头类型.pdf
- 国际标准 ISO 12165:2019 EN 注塑模具 压缩模、注塑模和压铸模的部件 相应术语和符号列表 Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols.pdf
- 国际标准 ISO 12165:2019 EN Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols 注塑模具 压缩模、注塑模和压铸模的部件 相应术语和符号列表.pdf
- 国际标准 ISO 12167-1:2023 EN 滑动轴承 带排水槽的静压滑动轴承 第1部分:带排水槽的油润滑滑动轴承的计算 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage g.pdf
- 国际标准 ISO 12167-1:2023 EN Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves 滑动轴承 带排水槽的静压滑动轴承 第1部分:带排水槽的油润滑滑.pdf
- 国际标准 ISO 12193:2004 EN Animal and vegetable fats and oils — Determination of lead by direct graphite furnace atomic absorption spectroscopy 动植物油脂 通过直接石墨炉原子吸收光谱法测定铅含量.pdf
- 国际标准 ISO 1219-3:2016 EN/FR 流体动力系统和部件 图形符号和电路图 第3部分:电路图中的符号模块和连接符号 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams.pdf
- 国际标准 ISO 1219-3:2016 EN/FR Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams 流体动力系统和部件 图形符号和电路图 第3部分:电路图中的符号模块和连接符号.pdf
- 国际标准 ISO 12194:1995 EN 烟叶 确定条状颗粒大小 Leaf tobacco — Determination of strip particle size.pdf
- 国际标准 ISO 12194:1995 EN Leaf tobacco — Determination of strip particle size 烟叶 确定条状颗粒大小.pdf
- 国际标准 ISO 12195:1995 EN 脱粒烟草 残茎含量的测定 Threshed tobacco — Determination of residual stem content.pdf
- 国际标准 ISO 12195:1995 EN Threshed tobacco — Determination of residual stem content 脱粒烟草 残茎含量的测定.pdf
- 国际标准 ISO 12197:2016 EN 伍德拉夫钥匙座铣刀 尺寸 Woodruff keyseat cutters — Dimensions.pdf
- 国际标准 ISO 12197:2016 EN Woodruff keyseat cutters — Dimensions 伍德拉夫钥匙座铣刀 尺寸.pdf
- 国际标准 ISO 12205:1995 EN 石油产品 确定中间馏分燃料的氧化稳定性 Petroleum products — Determination of the oxidation stability of middle-distillate fuels.pdf
有哪些信誉好的足球投注网站
文档评论(0)