Boeing D6-49327-G热压罐规范完整版.pdfVIP

Boeing D6-49327 版本 G                      第1页 共11 页 金属胶接和复合材料结构固化用热压罐/烘箱设备认证  D6-49327 版本：G   1、范围  a、 本文件的目的在于验证 Boeing 或其供应商用于金属胶接和复合材料构件制造 的热压罐/ 烘箱是否满足要求。这里所列出的要求仅适用于“D-16925 Qualification of Subcontractors to Perform Structural Bonding According to Boeing Structural Bonding Specifications”、“D6-49925 Qualification of Sources for Interior Plastic Parts”、“D6-53993 Qualification of Sources for Composite Parts ”、“ D6-83352 Common qualification and testing requirements for BAC5353 Composite Material Systems and Composite Structure”或 Boeing 技术规范中提及的供应商资质认证。特种工艺规范可 以增加补充技术条件。 b、 For purposes of determining conformance with specification limits in this standard, an observed or a calculated value shall be rounded to the nearest unit in the last right-hand digit used in expressing the specification limit, in accordance with the Rounding Method of ASTM E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications. 2、参考文件  以下文件的有效版本将作为本文件的一部分。  ASTM E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications BAC5621, Temperature Control for Processing of Materials D-16925, Qualification of Subcontractors to Perform Structural Bonding According to Boeing Structural Bonding Specifications D6-49225, Qualification of Sources for Interior Plastic Parts D6-53993, Qualification of Sources for Composite Parts D6-83352, Common Qualification and Testing Requirements for BAC5353 Composite Material Systems and Composite Structure 3、 资质等级  a、满足本文件要求的热压罐/烘箱应具备复合材料结构件/非结构件固化、胶接和金属 胶接的资格。