cm-04-58 铺设沥青混合料.pdf

458 Placing Asphalt Mixtures 458.1 Pre-Pave Meeting A meeting should be held with the contractor well in advance of the paving. At that time, all aspects of the paving operation should be discussed and agreed upon. Advance preparation for the meeting will be needed to collect names and telephone numbers of WisDOT, consultant, and contractor contact persons. It will also be necessary to check out equipment and materials against the standard specifications and contract provisions before the meeting. A suggested list of topics is shown in figure 458-1. Keeping a written record of the meeting agreements is suggested. A copy can then be furnished for reference during paving, if requested. FIGURE 458-1 Hot Mix Asphalt Pre-Pave Agenda Pre-Pave Agenda Project ID __________________________ Length __________________________________________ Termini _______________________________________________________________________________ Hwy ___________________________ County________________________________________ Pavement Type _______________________________________________________________________________ Meeting Date __________________________ At ________________________________________ Attendees: _______________________________________________________________________________ _______________________________________________________________________________ List for Discussion and Agreement A. These items are to be checked before the pre-pave meeting, provide available information at the meeting. Not all items below