英国石油公司（BP）标准 GP 06-25 - Design for the Prevention of Corrosion under Insulat.pdf

Document No. GP 06-25 Applicability Group Date 15 April 2009 GP 06-25 Design for the Prevention of Corrosion under Insulation and Fireproofing (CUI and CUF) Group Practice BP GROUP ENGINEERING TECHNICAL PRACTICES 15 April 2009 GP 06-25 Design for the Prevention of Corrosion under Insulation and Fireproofing (CUI and CUF) Foreword This issue of Engineering Technical Practice (ETP) GP 06-25 is a complete revision. Because the revisions are so extensive, revisions have not been identified by a bar in the margin as is normal practice. If proprietary products are mentioned by their trade name, these are mentioned for illustrative purposes only and are not meant to be recommendations of any one product over any other which may be on offer. The suitability of particular products for each specific application should be evaluated. Copyright © 2009 BP International Ltd. All rights reserved. This document and any data or information generated from its use are classified, as a minimum, BP Internal. Distribution is intended for BP authorized recipients only. The information contained in this document is subject to the terms and conditions of the agreement or contract under which this document was supplied to the recipients