通过电视墙软件控制解码器输出到电视墙简要步骤.doc

Decoder User Manual （Brief Steps） Connection Via TV-Wall software to control decoder to output video to TV-Wall as follows: Note：Decoder indicate network video server device. 1：Install the TV-Wall Software： ２：Set the Display Mode for TV-Wall Software Choose【TV-Wall】——【TV Wall Mode】menu： ３：Lock the TV-Wall Display Mode： It will remind you to restart after you lock the TV-Wall Display Mode. 4：Add decoder device： Choose【Edit】——【Decode Device】menu: Searching decode device，add the device to the system. Related decode device with monitor，choose decode device first, then choose monitor. Save and close the current settings at last. 5：Add the video source（Encoder）management Searching the video server device，add the device to the system. Double-click the last line to add the video server device by manually. Save and close the current settings at last. Please confirm to add the encoder IP address, web port, user name and password correctly： 6: Output the video on TV-Wall Software： Choose the connected video manually in the Manual Switch: Please operate as follows if you output video to TV-Wall Manually: If you want to view the image on the TV-Wall Software，double-click the channel name of the encoder： 7: Output the video to Monitor Click the right button to login NVD Set NVD Display the information of encoder. Recommend to choose itFill Recommend to choose it Fill in the encoder IP address, web port, user name and password on the TV-wall RS485 control Pan to setTV-Wall output mode and quality. RS485 control Pan to set TV-Wall output mode and quality.