APIRP14E近海生产平台管道系统的设计和安装1991.pdf

American Petroleum Institute RP 14E 1991 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems API RECOMMENDED PRACTICE 14E (RP 14E) FIFTH EDITION, OCTOBER 1, 1991 American Petroleum Institute 1220 L Street, Northwest Washington, DC 20005 ‚ Issued by AMERICAN PETROLEUM INSTITUTE Production Department FOR INFORMATION CONCERNING TECHNICAL CONTENTS OF THIS PUBLICATION CONTACT THE API PRODUCTION DEPARTMENT, 1201 MAIN STREET, SUITE 2535, DALLAS, TX 75202-3904 (214)748-3841. Users of this publication should become completely familiar with its scope and content. This publication is intended to supplement rather than replace individual engineering judgment. OFFICIAL PUBLICATION ‚ REG. U.S. PATENT OFFICE Copyright ©1991 American Petroleum Institute Attention Users of this Publication: Portions of this publication have been changed from the previous edition. The locations of changes have been marked with a bar in the margin, as shown to the left of this paragraph. In some cases the changes reflect minor editorial adjustments. The bar notations in the margins [RP 14E] Copyright by American Petroleum Institute (Fri Nov 02 11:01:53 2001) are provided as an aid to users as to those parts of this publication that have been changed from the previous edition, but API makes no warranty as to the accuracy of such bar notations. NOTE: This is the fifth edition of this Recommended Practice. It includes changes to the fourth adopted at the 1990 Standardization Conference. This standard shall become effective on the date printed on the cover, but may be used voluntarily from the date of distribution. POLICY STATEMENT API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERA