基于FPGA的等精度频率计的设计毕业设计论文.doc

兰州交通大学毕业设计（论文） PAGE PAGE VI 摘 要 伴随着集成电路(IC)技术的发展，电子设计自动化(EDA)逐渐成为重要的设计手段，已经广泛应用于模拟与数字电路系统等许多领域。电子设计自动化是一种实现电系统或电子产品自动化设计的技术，它与电子技术、微电子技术的发展密切相关，它吸收了计算机科学领域的大多数必威体育精装版研究成果，以高性能的计算机作为工作平台，促进了工程发展。 数字频率计是一种基本的测量仪器。它被广泛应用与航天、 \o 临汾阳光电子传媒工作室 @V 电子、测控等领域。采用等精度频率测量方法具有测量精度保持恒定，不随所测信号的变化而变化的特点。本文首先综述了EDA技术的发展概况，FPGA/CPLD开发的涵义、优缺点，VHDL语言的历史及其优点，概述了EDA软件平台QUARTUSⅡ；然后介绍了频率测量的一般原理，利用等精度测量原理，通过FPGA运用VHDL编程，利用FPGA(现场可编程门阵列)芯片设计了一个8位数字式等精度频率计，该频率计的测量范围为0-100MHZ,利用QUARTUS Ⅱ集成开发环境进行编辑、综合、波形仿真，并下载到CPLD器件中，经实际电路测试，仿真和实验结果表明，该频率计有较高的实用性和可靠性。 关键词:电子设计自动化；VHDL语言；频率测量；数字频率计 Abstract The Electronic Design Automation (EDA) technology has become an important design method of analog and digital circuit system as the integrated circuits growing. The EDA technology, which is closely connected with the electronic technology, microelectronics technology and computer science, can be used in designing electronic product automatically. Digital frequency meter is a basic measuring instruments. It is widely used in aerospace, electronics, monitoring and other fields. With equal precision frequency measurement accuracy to maintain a constant, and not with the measured signal varies.We firstly present some background information of EDA, FPGA/CPLD,VHDL and the EDA software platform QUARTUS Ⅱin this thesis;then introduced the general principle of frequency measurement, utilization of precision measuring principle, using VHDL programming, use of FPGA (Field Programmable Gate Array) chip design such as the precision of a digital frequency meter, this frequency meters measuring range is 0-100MHZ,use QUARTUS Ⅱintegrated development environment for editing, synthesis, wave simulation, and download to the CPLD device, by the actual circuit testing, simulation and experimental results show that the frequency meter has high practical and reliability. Keywords: Electronic Design Automation,VHDL, Frequency measurement,digital frequency meter 学位论文原创性声明 本人郑重声明：所呈交的学位论文，是本人在导师的指导下进行的研究工作所取得的成果。尽我所知，除文中已经特别注明引用