采用硅光电池实现光照度计电路设计方案与分析.docVIP

采用硅光电池实现光照度计 电路设计和分析 作者姓名：# # # 专业名称：应 用 物 理 学 指导教师：# # #讲师 摘要 本文通过理论分析与数值比对来确定光照强弱与光电池输出光电信号的关系，并且通过这种关系设计了相应的光电检测电路，更直观展现光伏技术在实际生活中的应用。 随着光伏技术的日渐成熟以及应用的扩展，对光照的研究也日新月异。所以对如何更加准确的测定光照参数也提出了更高的要求。针对不同的要求，如何快速设计出对应的光电探测器，又有了新的课题。本文在此背景下，进行了光照度计电路的设计与分析。 本论文共分四部分：第一部分为光电池特性介绍及实验特性参数，第二部分为电路方案设计和电路实现，第三部分为利用Protel 99SE进行电路设计，第四部分为电路实物制作与调试。 关键词 ：光电池 转换电路 光电效应 伏安特性 Abstract A comparsion between analysis theory and numericalratio, which can determine the relationship between the intensity of illumination and optical signal of photocell output in this paper. And we design a corresponding circuit ofphotoelectric detection by the relationship showingthe application of photoelectric technology in our daily life. Withthe development and widespread of photoelectric technology, fracture treatment has been changing quickly. So there have more high requirements abouthow to determine the parameter of the light more exactly. As for different requirements, it is a new project to design the corresponding electrophptonic detector. Under this background, this paperdiscuss design and analysisof the circuit of light meter. There are four parts in this paper：In the first part, it introduce the character of photoelectric cell and characteristic parameter of experiment.The second part is about designing scheme of circuit and realizing the circuit, The third part is using Protel 99SE to design circuit, The fourth part is to manufacture and adjust the circuit. Keywords:Potoelectric cell,Conversion circuit,Photoelectric effect, Volt-Ampere characteristic 目录 TOC \o 1-3 \h \z \uHYPERLINK \l _Toc387768581摘要 PAGEREF _Toc387768581 \h I HYPERLINK \l _Toc387768582Abstract PAGEREF _Toc387768582 \h II HYPERLINK \l _Toc387768583目录 PAGEREF _Toc387768583 \h III HYPERLINK \l _Toc387768584前言 PAGEREF _Toc387768584 \h 1 HYPERLINK \l _Toc3877685851 光伏技术的发展历程简介 PAGEREF _Toc387768585 \h 2 HYPERLINK \l _Toc3877685861.1 光伏技术的历程 PAGEREF _Toc387768586 \h 2 HYPERLINK \l _Toc3877685871.2 光伏技术的现状 PAGEREF _Toc387