后钢板弹簧吊耳加工工艺及夹具设计35054.docVIP

学生姓名： 马祥雷 学生学号： 0801011201 院（系）： 机械动力工程学院 年级专业： 08级机械制造 指导教师： 邓洪财 二〇一〇年九月 PAGE = 1 \* ROMAN I 摘 要 本次设计是对后钢板弹簧吊耳零件的加工工艺规程及一些工序的专用夹具设计。后钢板弹簧吊零件的主要加工表面是平面及孔。由加工工艺原则可知，保证平面的加工精度要比保证孔的加工精度容易。所以本设计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证加工精度。基准选择以后钢板弹簧吊耳大外圆端面作为粗基准，以后钢板弹簧吊耳大外圆端面与两个工艺孔作为精基准。主要加工工序安排是先以后钢板弹簧吊耳大外圆端面互为基准加工出端面，再以端面定位加工出工艺孔。在后续工序中除个别工序外均用端面和工艺孔定位加工其他孔与平面。整个加工过程均选用组合机床。 关键词 后钢板弹簧吊耳，加工工艺，专用夹具 PAGE II ABSTRACT The design of the plate after spring lug parts of the processing order of the processes and some special fixture design. Spring plate after hanging parts of the main plane of the surface and pore. By the principle known Processing , the plane guarantee precision machining holes than guarantee the machining precision easy. So the design follows the surface after the first hole principle. Plane with holes and the processing clearly divided into roughing and finishing stages of processing to ensure accuracy. After selecting base plate spring lug large cylindrical face as a rough benchmark, After the leaf spring lug large cylindrical end with two holes as a precision technology benchmarks. main processes arrangements after the first spring plate lug large cylindrical face each other benchmarks machined face, End position to further processing out of holes. In addition to the follow-up processes are individual processes with end-positioning technology and other processing Kong and plane. The entire process of processing machine combinations were selected. Key words The empress steel plate spring coil mourns the ear,Process the craft,Appropriation tongs PAGE 2 目 录 TOC \o 1-3 \u 摘 要 Ⅰ ABSTRACT PAGEREF _Toc170348783 \h II 目录 1 1绪 论 PAGEREF _Toc170348785 \h 1 2 后钢板弹簧吊耳加工工艺规程设计 PAGEREF _Toc170348786 \h 3 2.1零件的分析 PAGEREF _Toc170348787 \h 3 2.1.1零件的作用 PAGEREF _Toc170348788 \h 3 1.1.2零件的工艺分析 PAGEREF _Toc170348789 \h 3 2.2工艺过程设计所应采取的相应措施 PAGEREF _Toc170348790 \h 4 2.3后钢板