模具制造业现状及发展状况论文.docVIP

郑州交通职业学院 毕 业 论 文 论文题目：模具制造业的现状及发展状况 所属系别 机电工程系 专业班级 姓　　名 学　　号 指导教师 撰写日期 2015 年 5 月 摘 要 伴随着十六届五中全会的召开，“提高自主创新能力”被提升到了国民经济发展更高的战略高度。国家、社会和企业都已经充分认识到，中国制造业未来的发展必须依靠自主创新，走创业之路。近几年，中国模具产业总产值保持持续增长。虽然中国模具工业在过去十多年中取得了令人瞩目的发展，但许多方面与工业发达国家相比仍有较大的差距。例如，精密加工设备在模具加工设备中的比重还比较低，CAD/CAE/CAM技术的普及率不高，许多先进的模具技术应用还不够广泛等等。因此我们不仅要好好的加强模具技能的训练，以达到熟能生巧的本领，而且更重要的是必须学习系统的冲压知识，和冲压与热处理过程，使每个模具工作者都能系统有效的学习相关知识，以期促进冲压工艺的推广应用。 关键词：模具制造业，发展现状，发展方向。 Abstract Along with the convening of the Plenum, to improve the capability of independent innovation has been elevated to a higher strategic height of national economic development. The state, society and enterprises have been fully aware of the future development of Chinas manufacturing industry must rely on independent innovation, to take the entrepreneurial path. In recent years, Chinas mold industry output to sustain growth. Although Chinas mold industry in the past ten years has made remarkable development, but many aspects of the industrial countries there is still a large gap. For example, the proportion of precision machining equipment mold processing equipment is still relatively low, not high penetration of CAD / CAE / CAM technology, many advanced mold technology applications also not wide enough. Therefore, we must not only strengthen the good die skills training to achieve the ability of practice makes perfect, but more importantly, must learn the system knowledge of stamping and punching and heat treatment process, so that each mold workers can systematically and effectively learn relevant knowledge , in order to promote the popularization and application of the stamping process. Keywords: mold manufacturing, development status and development direction. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc345013517 1 引言 PAGEREF _Toc345013517 \h 1 HYPERLINK \l _Toc345013518 2 模具的发展历史与现状 PAGEREF _Toc345013518 \h 1 HYPERLINK \l