基于S7-300PLC和ADAM模块的过程控制实验对象设计（毕业学术论文设计）.docVIP

南 阳 理 工 学 院 本科生毕业设计（论文） 学院（系）： 电子与电气工程 专 业： 自动化 学 生： 指导教师： 完成日期 201 年 5 月南阳理工学院本科生毕业设计（论文） Design of Process Control Experiment Equipment Based on S7-300 PLC and ADAM Module 总 计： 页表 格： 个 插 图： 幅 南 阳 理 工 学 院 本 科 毕 业 设 计（论文） 基于Design of Process Control Experiment Equipment Based on S7-300 PLC and ADAM Module 学 院（系）： 电子与电气工程 专 业： 自动化 学 生 姓 名： 学 号： 指 导 教 师（职称）： （副教授） 评 阅 教 师： 完 成 日 期： 南阳理工学院 Nanyang Institute of Technology基于自动化专业 [摘 要][关键词] Design of Process Control Experiment Equipment Based on S7-300 PLC and ADAM Module Automation Specialty REN Jia Abstract: This project is to use s7-300PLC and ADAM module to control the process of the four parameters called pressure,temperature,flow and liquid level in simulate engineering field. And the design producer would control the experimentdevice. The topic is to design the machinery rack, the storage water tank,the two decks boiler,water tank and volume pipe line etc. of the control object. Also, the topic is to design both the signal delivery and the sensor examination of temperate, pressure,flow and the liquid parameter. Particularly, the topic include how to select and install the water pump;how to design and install the two decks boiler, select and install the transducer; how to design and install the water tank. According to the method, content and steps of the process control design, I have accomplished the assignment ultimately. And further more,I have drew the engineering graph paper and the instrument data tables, which could to be the technology materials of subjective teaching in automation subject. Key words: Machinery rack;transducer;regulating valve;process control 目 录 1 引言 1 2 控制对象机械台架的设计和安装 1 2.1 控制对象机械台架的设计和安装 1 2.2 主要实验设备的安装 2 3 主要设备的选型和功能简介 2 3.1 压力对象的设计 2 3.