钢结构高强度螺栓连接的设计施工及验收规范（英文版）.docVIP

本英文版为内部资料，仅供参考，以中文版为准。 本英文版为内部资料，仅供参考，以中文版为准。The Chinese version of standards has precedence to their English translations which are only for internal reference. 中华人民共和国行业标准 Trade Standard of the People’s Republic of China 钢结构高强度螺栓连接的设计、施工及验收规范 Code for design, construction and acceptance of high strength bolting for steel structure JGJ 82－91 Beijing 1992 中华人民共和国行业标准 Trade Standard of the People’s Republic of China 钢结构高强度螺栓连接的设计、施工及验收规范 Code for design, construction and acceptance of high strength bolting for steel structure JGJ 82－91 Complied by: Hubei Provincial Building Engineering Corporation Approved by: The Ministry of Construction of the PRC Date of Enforcement: November 1, 1992 Notice on issuance of the trade standard “Code for design, construction and acceptance of high strength bolting for steel structure” Jian Biao No. (1992) 231 Construction commissions (departments) of all provinces, autonomous regions and municipalities directly under the Central Government, construction commissions of cities directly under State planning, relevant Ministries and commissions of the State Council: In accordance with the requirement of the Document Jian Gong Ke Zi No.14 issued by the former Building Engineering Bureau of the State, the “Code for design, construction and acceptance of high strength bolting for steel structure”, developed by Hubei Provincial Building Engineering Corporation, has been reviewed and approved to be a trade standard with the code No. JGJ 82－91, which will be implemented as of November 1, 1992. This standard shall be put under the administration of China Building Science Research Institute, which is affiliated to the Ministry of Construction, and Hubei Provincial Building Engineering Corporation shall be responsible for its interpretation. This standard was published by the Standard and Ration Research Institute of the Ministry of Construction. The Ministry of Construction of the People’s Republic of China April 16, 1992 Contents