家电现场常规测试标准.docVIP

现场常规测试标准 General on-site testing Specification 1. 外观检查Appearance check Apply to: All product 适合对象：所有产品 Specification 要求 - Visual check with a distance of 50cm without magnification under good lighting condition. 在光线良好的环境下，通过目视在距离产品50公分处检查，不使用放大镜 - Include packing and product inspection 包括包装和产品检验 Acceptance Criteria: 判定规则 - nonconformity of packing 包装的不符合项 - - CRITICAL reject: which will cause safety problem, especially live insect inside the package. 致命缺陷：存在安全隐患的缺陷，例如：包装里有活的昆虫 MAJOR/MINOR reject: e.g. shipping mark missing, incorrect, torn / damage/ accessories missing, illegible instruction, dead insect and so on. 重度、轻度缺陷：例如：箱唛缺失、缺失、破、配件缺失、说明书模糊、死的昆虫等等 MINOR reject: e.g. packing material with dirty/scratch and so on. 轻度缺陷：包装材料脏或者刮伤等等 - nonconformity of product 产品的不符合项 - - CRITICAL reject: which will cause safety problem, e.g. exposed copper wire, power cord detach out, plug not security, air-logged drain hole and so on 致命缺陷：存在安全隐患的缺陷，例如：铜线外露、电源线脱落、插头不牢固、排水孔堵塞等等 MAJOR reject: which will not cause safety problem but will negatively affect the saleability of the product, e.g. poor fitting parts, poor appearance parts, unit unstable and so on 主要缺陷：不存在安全隐患，但严重影响消费者购买意愿的缺陷，例如：配件不良、外观不良、不稳定等等 MINOR reject: which any condition that the user may not like, but would likely keep the product regardless of non- conformity, e.g. small scratches, dents, or dirt on a product at a position which is not very obvious to the customer and so on. 次要缺陷：一定程度上影响消费者购买意愿的缺陷，例如：小的刮伤、凹痕、产品不明确位置的脏等等 2. 高压测试High voltage check Apply to: 适用于 With rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. 额定电压不超过250V的单相器具，和额定电压不超过480V的其他器具 Procedure: 程序 a. Tester should be verified with safety and proper functioning before use 使用仪器之前确认仪器功能正常并且安全可靠 b. Set up the tester at appropriate breakdown current limit (0.5-5mA) and appropriate voltage. 设定适当的泄露电流(0.5-5mA)和适当的电压 c. All of the switch on the sample should be situated at ON and MAX where