交流接触器装配设计与仿真.docVIP

交流接触器装配线设计与仿真 摘 要  本课题以CJ-12交流接触器为研究对象，进行装配流水线设计。根据装配的组织形式，产品的装配线采用带式输送机，双滚筒多拖辊水平输送方式，此方法便于提高产品生产效率的提高。关键词：交流接触器；AC contactor assembly line design and simulation Abstract This task is the research target with CJx2-12s exchange contactor ，Be underway that the assembly process is designed and the fitting pipleline is designed 。According to the organization of assembly, product assembly line with conveyor, double drum roller drag the level of multi-mode transmission, this method is easy to increase production efficiency。First of all， it made the simple introduction for this passage about AC contactor structure、process and production line and IE, especially Production Line Balance and Modular Arrangement of Predetermined Time Standard。Modeling method used for each station on the production line analysis of the operational actions to determine the operating time of the operation unit。At the same time，we c ascertain out the meter of a production line ,and then combined operation time with the meter to decide the number of operation workers in every labor place.。Besides,，the production line could be improved by making use of 5 W1H , ECRS principle and production line balance。 After that, the designing mission would be accomplished ultimately。Finally,，simulation software Flexsim production line contactor operation process is simulated. So that further optimization of the assembly line。 Keywords: ACcontactor??? Line Balancing????Flexsim?Simulation 目录 1 绪论 1 1.1 课题的目的与意义 1 1.2 课题研究的内容 1 1.3 课题的发展现状和前景展望 1 2 交流接触器装配线设计 3 2.1 流水线 3 2.2 工作研究 4 2.3 交流接触器装配线的设计 5 3 装配线的人因设计 17 3.1 坐姿作业空间设计 17 3.2 工位器具的设计 19 3.3 照明环境 20 4 生产线仿真及改进分析 21 4.1 离散系统及其仿真 21 4.2 Flexsim 软件介绍 23 4.3 仿真模型的建立与实现 26 5 总结与展望 31 5.1 本文结论 31 5.2 本文展望 31 致谢 32 参考文献 33 1 绪论 1.1 课题的目的与意义 CJx2-12交流接触器装配线的设计有着重要的目的和意义，装配线在工业生产中得到广泛的应用，这些装配线的用，对提高劳动生产率、改善工人劳动条件、产品质量、降低能耗等方面都取得了显著的成效。从工艺学角度来了解课题的目的和意义。电器制造工艺学是研究电器零部件制造和装配的科学。工艺是零部件或产品生产过程中，为保证达到设计标准所需的技能、方法和手段。它是企业进行计划管理、技术准备、生产调度、原材料供应、劳动调配乃至经济核算的技术依据。以工