metron资料.docVIP

Products 5 - axis HSC - Milling machines |Patented machine concept| HSC - 5 - axis - simultaneous milling Direct milling of molds from sandDiemaking and toolmaking (aluminium, steel, gray cast iron)ModelmakingMilling of plasticsspecific adjustment to the requested work space |METROM P800 M|Diemaking and toolmaking |METROM P2000|Direct milling of molds from sand Further: Customized programming of controls, in particular numerical control controls for parallel kinematic machines Controls for hydraulic drive systems METROM P800 M working space circular table: z - axis: swivel angle A: circular angle C: ? 800 mm 450 mm 90 deg no limit dynamics acceleration: velocity: 12 m/s2 60 m/min accuracy: repeating accuracy: 0.003 mm building area 2.300mm x 2.000mm x 2.500mm mass 4.5 t METROM P2000  working space circular table: z - axis: swivel angle A: circular angle C: ? 2800 mm 600 mm 90 deg no limit Dynamik acceleration: velocity: 10 m/s2 60 m/min accuracy repeating accuracy: 0.010 mm mass 4.5 t Patented machine concept Kinematics 5 axis cinematic (pentapod) circular table with direct drive 5 axis milling high productivity by high dynamics large working space with small building area swivel angle 90 deg G-Code programming without PKM-specific restrictions patented kinematics Main spindle  HSK 6324,000 rpm14 kW HSK 63/5024,000 rpm30 kw / 40 Nm SK 4015,000 rpm25 kw / 80 Nm Control andronic 2000 - high performance CNC additional parallel kinematic processor NC cycle time = 1 ms (optional 0.5 ms) comfortable look ahead functions real time kinematic supervision Portrait The companyMechatronische Maschinen GmbHwas founded in 2001 by Dr. Michael SchwaarThe companies main tasks are Construction,Design,Fabrication,Sales and start-up of mechatronic machine systems, in particular on the basis o