阶段性ppap生产零件批准的流程.pptVIP

问题 阶段1有PSW吗？ 如果PV试验没有完成，福特能批准阶段1的PSW吗？ * Phase 2:〝Production Verification〞 Objectives: To confirm all customer engineering design record and specification requirements are properly understood by the supplier, and that ALL production streams have the potential to produce product consistently meeting these requirements during an actual production run at the quoted production rate. * 阶段2：“生产确认” 目的： 确认供应商是否正确理解顾客工程设计记录和工程规范要求，以及所有生产线是否都有能力按照保价时确定的产品生产率，有潜力持续地生产符合要求的产品。 * Production Stream ● CUTSEW CUT SEW1 CUT SEW2 CUT SEW3 ASSEMBLY1 ASSEMBLY2 ASSEMBLY1 DELIVERY DELIVERY * 生产线 ● 切割和缝合 装配1 装配2 切割和缝合1 切割和缝合2 切割和缝合3 装配1 运输 运输 * Applicable Elements Conduct PPAP Phase 0 and 1 for ALL the production streams ALL PPAP Element are applicable again (for the additional production streams) * 适用要素 所有生产线采用PPAP阶段0和1 所有PPAP要素再次适用 （对于附加生产线） * Questions What happens if the supplier has only one line / one production stream? Does the supplier have to measure the parts again? Does the supplier have to conduct the PV tests again? How many parts to produce? * 阶段性PPAP生产零件批准流程 * APQP . Product Quality Planning is a structured method of defining and establishing the steps necessary to assure that a product satisfies the customer. Supplier Timing PlanSupplier Development Plan . Guidelines to produce a product quality plan  which will support the development of a product  that will satisfy the customer 5 Phases-APQP Elements * APQP（先期产品质量策划） . 产品质量计划是一个结构化的方法，用于定义和 建立一些必要的措施以确保产品满足顾客的需求。 供应商时间计划供应商开发计划 . 制订产品质量计划的指导方针，能支持开发出 满足顾客需求的产品 5 个阶段-APQP 要素 * What is PPAP . It is a process to evaluate -If the supplier understands the specification  requirements (drawings, material, tests) -If the manufacturing process can produce product  meeting these requirements -If the process is stable . It take place during an actual production  run at the prod