品质管理(世界500强企业广达电脑）经典作品.pptVIP

柏拉圖月報也應填寫妥當並指出哪些問題點尚未解決. 這樣的方式將有助於確立方向使行動有所進展. 喷漆品质管理 PAINTS QUALITY CONTROL Prepared by: QSMC SQE Rick Miao Oct 20 2003 revision 01 试漆 试产渐进生产计划 （SLR ） PPAP,SIP,SOP ready 送承认 量产渐进生产计划 （SLM) RTS量产 喷漆量产前管制流程 稳定量产 直通率目标量产点检 漆厂线上稽核 量产SL -制程不良P-chart SQRC Review 试漆报告 CPK report 调漆及喷漆参数标准 PMP，SIP and SOP 试产前SL 喷漆稽核 点检 喷漆周月报 -直通率目标 -周月品质改善 (3up chart and painting monthly report ISSUE异常处理 -DELL 5C report -TFC SCAR -LESSON LEARN 喷漆品质系统管理 喷漆制程管理流程 Thickness CPK building Color match CPK building Safety launch building ----co-work with paints suppliers try thickness Spec and CPK in. --Trial run units min. 30pcs --Fix the painting parameter. ----Painting applicators take care. --Trail run min. 100pcs for yield rate -- Yield rate meet target. --Top 5 issue with FA and CA. --co-work with paints suppliers try Painting color with tints adjustment to in Spec. --Trial run units min. 30pcs. --Fix the painting tints ratio. --Painting suppliers take care. --co-work with paints suppliers try color and Thickness CPK 1.33. --Trial run min. 3 lots(each lots 30pcs) --QSMC SQE involve each CPK report Review. --All reliability should be passed. Painting Applicators Trail run process flowchart Yield rate building CPK Continues Trial Run building --.color and thickness Spec and CPK. in --.reliability testing passed. --.yield rate can support RTS. Trail run ok --Before RTS 3K trial run safety launch -- After RTS 5K MP safety launch. -- Safety launch with issue highlight. with FA and CA per day. 试漆PROCSS流程 Spec. PMP creation Safety launch building ----Color chip ----PDS and Cosmetic testing Spec. ----Painting ratio viscosity Spec. --Trail run min. 100pcs for yield rate -- Yield rate meet target. --Top 5 issue with FA and CA. --Based on trail run result create PMP. --Painting ratio and viscosity parameter. --FAI and IPQC check items. --Flash time oven temp. and time. --Painting parameter. --Rel