Stanley LED模组介绍资料.pdfVIP

SLIM STICK S-TYPE LED MODULE APPLICATIONS MANUAL WARNING ・Direct LED emission can seriously damage the eyes. Never view a LED emission directly. ・Never use a disassembled LED module. ・A LED generates heat while it is emitting. (The ambient temperature is increased by 20℃℃ by a 30 LED unit). ℃℃ Pay attention to avoiding burns and to prevent deformation of the LED mount unit. INTRODUCTION This Application Manual is produced for engineers who intend to design lighting items using the Stanley Slim Stick S-Type LED Modules. Through the use of this Application Manual, the lighting items can use their unique characteristics effectively. Safety precautions and notes on the necessary quality conditions for design are described in this manual. Before the LED lighting item is designed, be sure to read this manual thoroughly and understand the functions of LED modules. For performance and quality specifications of LED modules, refer to specifications (separately supplied). SPECIAL FEATURES OF SLIM STICK S-TYPE LED MODULE The Stanley Slim Stick S-Type is a unique brand-new LED illumination module which has the special characteristics described below. ・ The thin and narrow stick shape of the LED module is applicable to illumination installed in the narrow spaces. ・ Emission color can be selected from either warm white or normal white. ・ Two LED configurations (15 or 30 LEDs) are available. ・ The LEDs are aligned in the same pitch. ・ By using a special connector supplied by BJB, LED modules can be joined and the joined LED module emits the same pitch. ・ The LED module can operate on 12V DC power supply. ・ The LED luminous intensity and emission color dispersion are minimized by the regulation specified by Stanley. ・ The Stanley LED Modules all conform to the RoHS D