505编程卡.docVIP

附 录 A 505 PROGRAM MODE WORKSHEET 505编程方式工作卡 GOVERNOR SERIAL NUMBER___（调速器顺序号）____ APPLICATION________使用场合_____________ DATE___日期____ For details on individual settings, refer to Chapter 5. 有关各个设定值的详细内容，请参阅第五章 TURBINE START 汽轮机起动 Manual Start _____________YES _____ NO _____ 手动起动 Automatic Start ___________YES _____ NO _____ 自动起动 Semiautomatic Start _______YES _____ NO _____ 半自动起动 Rate to Min (RPM/Sec) ______________ RPM/SEC 至最小转速速率 Valve Lmtr Rate (%/Sec) _______________ %/SEC 阀位限制器速率 Use Idle/Rated? ___________YES _____ NO _____ 采用暖机/额定 Idle Setpt (RPM) _______________________ RPM 暖机转速设定值 Rated Setpt (RPM) ______________________ RPM 额定转速给定值 Idle/Rtd Rate (RPM/SEC) ____________ RPM/SEC 暖机/额定速率 Use Auto Start Sequence ____YES _____ NO _____ 采用顺序自动起动 Cold Start = ( xx Hrs ) _________________ HRS 冷态起动 Hot Start = ( xx Hrs) ___________________ HRS 热态起动 Low Idle Setpt (RPM) ___________________ RPM 低暖机转速设定值 Low Idle Delay (Cold) ___________________ MIN 低暖机转速保持（冷态） Low Idle Delay (Hot) ____________________ MIN 低暖机转速保持（热态） Rate to Hi Idle (Cold) _______________ RPM/SEC 至高暖机转速速率（冷态） Rate to Hi Idle (Hot) ________________ RPM/SEC 至高暖机转速速率（热态） High Idle Setpt (RPM) ____________________RPM 高暖机转速设定值 High Idle Delay (Cold) ___________________ MIN 高暖机转速保持（冷态） High Idle Delay (Hot) ____________________ MIN 高暖机转速保持（热态） Rate to Rated (Cold) ________________ RPM/SEC 至额定转速速率（冷态） Rate to Rated (Hot) _________________ RPM/SEC 至额定转速速率（热态） Rated Setpt (RPM) ______________________ RPM 额定转速设定值 Auto Halt at Idle Setpts _______ YES ____NO ____ 在暖机转速下自动暂停 Ext Trips in Trip Relay _______ YES ____NO ____ 外部跳闸释放跳闸继电器 Reset Clears Trip Output ______ YES ____NO ____ 复位清除跳闸输出 SPEED CONTROL 转速控制 Teeth Seen by MPU __________________________ 测速齿轮齿数 Gear Ratio 1 :_______________________________ 速比 1： Failed Speed Level(RPM) _________________RPM 失效转速值 Use Speed Input #2? _______ YES ____NO _____ 采用 2#转速输入 Failed Speed Level(RPM) _________________RPM 失效转速值 Off-Line Prop Gain __________