毕业设计（论文）-模块化机器人设计精选.docxVIP

模块化机器人设计摘要如今，机器人的发展突飞猛进，机器人服务已经覆盖了人们生活、工作、娱乐的方方方面。随着人类的需求的不断增加，对机器人领域的探索也越走越远，机器人模块化技术已在各个领域的产品研究和开发中广泛应用。于传统机器人相对比，模块化机器人柔性更好，自修复能力强柔性高，且容错性强、成本较低。模块化结构较简单，便于加工，各模块能互相替换，组装快捷简便。由于模块化机器人结构和功能的可重组性，对任务和环境有很强的适应能力。采用模块化技术，有利于机器人的维护和保养，缩短了机器人设计的时间。因此，本文将采用模块化的方法开发一种新机器人系统，希望有利于改善目前机器人控制复杂、通用性差和操作繁琐等问题。本文一共分为六个部分，第一部分绪论主要概括模块化机器人的研究背景、意义和国内外模块化机器人研究现状，第二部分探讨了机器人模块化的设计原理和方法，第三部分主要讨论了机器人控制系统设计，第四部分分析机器人主从控制策略。第五部分概述了机器人构型，最后进行了小结。关键词：机器人；模块化；系统设计；构型AbstractNowadays, the development of robots is advancing by leaps and bounds. Robot service has covered all aspects of peoples life, work and entertainment. With the increasing demand of human beings, the exploration of robot field is more and more far away. Robot modularization technology has been widely used in product research and development in various fields. Compared with the traditional robot, modular robot is more flexible, self repairing ability, high flexibility, and good fault tolerance and low cost. The modular structure is simple, easy to process, each module can replace each other, and the assembly is quick and easy. Because of the reconfiguration of modular robot structure and function, it has a strong adaptability to task and environment. Modular technology is beneficial to the maintenance and maintenance of robots, and shortens the time of robot design. Therefore, this paper will use modular method to develop a new robot system, in the hope of improving the complexity of robot control, low universality and tedious operation. This paper is divided into six parts, the first part is the introduction mainly summarizes the modular robot research background, significance and research status quo of inside and outside of the modular robot, the second part discusses the design principle and method of modular robot, the third part mainly discusses the design of robot control system, the fourth part of the analysis of the master-slave robot control strategy. In the fifth part, the configuration of robot is summarized, and