智能停车场管理系统之车位引导-源代码.docVIP

本智能停车场管理系统之车位引导/******************************************************************************/ /* Name: 智能停车场管理系统之车位引导 b*/ /****************************************************************************** #include reg52.H #include intrins.h #define uchar unsigned char #define uint unsigned int //引脚定义 sbit RX = P3 ^ 3; //超声波模块ECH0 sbit TX = P3 ^ 4; //超声波模块TRIG sbit CS = P3 ^ 5; //12864片选 高电平有效 sbit SID = P3 ^ 6; //12864数据 sbit SCLK = P3 ^ 7; //12864时钟 sbit H_1=P1^0; //定义红外传感器的输入端口 sbit H_2=P1^1; sbit H_3=P1^2; sbit H_4=P1^3; sbit H_5=P1^4; sbit H_6=P1^5; sbit H_7=P1^6; sbit H_8=P1^7; sbit H_9=P3^0; #define DATAOUT P2 //指定P2口做为点阵屏输出 /*****************************************************/ /*16*16点阵屏的显示*/ /*****************************************************/ sbit DATA=DATAOUT^0; //列数据输出位 sbit SCLH=DATAOUT^1; //列扫描时钟位 sbit SCLT=DATAOUT^2; //列数据锁存位 sbit AB=DATAOUT^4; //行数据输出位 sbit SCK=DATAOUT^5; //行扫描时钟位 unsigned char lhj[32];//32字节RAM做为16*16点阵屏显示缓存 void display();//做为点阵扫描函数，将显示缓存的数据输出到点阵屏 void displayS(unsigned int timer);//指定时间扫描显示 void displaymove(unsigned char *lp,unsigned char c,unsigned char timer);//显示汉字内容的移动效果，LP指向要显示第一个字的首地址，C表示显示字的个数， //timer是移动的速度 void displaymovetb(unsigned char din,unsigned char *lp,unsigned char timer); //上下移动内容，din：1为向下，0为向上，lp指向要移入的内容，timer为移动速度 code unsigned char HUAN[32]={ /*欢*/ 0x12,0x10,0x7F,0x90,0x12,0x10,0x73,0x90, 0x52,0xBE,0x73,0xA2,0x14,0x24,0x22,0x50, 0x7F,0x90,0xA4,0x10,0x3F,0x10,0x24,0x28, 0x3F,0x28,0x24,0x24,0x3F,0xC4,0x20,0x82, }; code unsigned char YING[32]={ /*迎*/ 0x00,0x00,0x41,0x84,0x26,0x7E,0x14,0x44, 0x04,0x44,0x04,0x44,0xF4,0x44,0x14,0xC4, 0x15,0x44,0x16,0x54,0x14,0x48,0x10,0x40, 0x10,0x40,0x28,0x40,0x47,0xFE,0x00,0x00, }; code unsigned char GUANG[32]={ /*光*/ 0x01,0x00,0x21,0x08,0x11,0x0C,0x09,0x10, 0x09,0x20,0x01,0x04