福鸟减速器润滑样本1-1204-US.pdfVIP

Single and Multicircuit Pumps 11204US for Circulating and Hydrostatic Lubrication as Gear, Gerotor and Vane Pump Units, Reservoir Units Gear pump unit Gerotor pump unit Multicircuit pump unit The pump units specified in this leaflet are lubricant delivery The permissible pressure and pumps without pressure relief fixtures and are designed for delivery rates vary with the continuous operation in circulating and hydrostatic lubrica viscosity. tion systems. Pay attention to the respec tively permissible viscosity! These pump units may also be used for hydraulic tasks to the extent permitted by the pressure and viscosity ranges stated in When using oils with viscosi the tables. ties outside the indicated ranges (spindle oils and highly The drive is provided by a threephase motor designed for a viscous oils), please ask for rated voltage of 230/400 V to DIN IEC 38. State special voltages, further information. if required, when ordering. Pump unit with reservoir Please note that even Units with one to twenty lubrication circuits are available. standard oils may become extremely thinbodied or highly Multicircuit gear pumps ensure a uniform delivery rate viscous due to changes in to individual feed lines and lubrication points against temperature. varying resistances. Ambient temperature Smooth running and good suction performance are the max. +40 °C, characteristic features of gerotor pum