- 1、本文档共61页,可阅读全部内容。
- 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
辽 宁 科 技 学 院
本科毕业设计
题目: X6132型普通铣床经济型数控化改造 专题:
X6132型普通铣床经济型数控化改造
摘要
随着计算机技术的飞速发展,发展现代计算机化数字控制(CNC)机床,是当前机械制造业进行技术改造,技术革新的必由之路,是未来工厂自动化的基础。因此,这次对普通机床进给系统的数控改造设计更显得重要。
本文是对X6132铣床进行数控改造,主要分五个部分进行了介绍。第一部分是数控机床的概述,第二部分是进给系统的总体设计方案,第三部分是伺服进给机械部分设计计算,第四部分是经济与环保性能的简要分析,第五部分是机械结构三维造型。基于步进电机的机械改装减少了人的工作量,把手动转变为电动。本次改造用了三个步进电机,分别控制机床的三个方向(纵向、横向和垂向)的进给,通过齿轮或带轮带动滚珠丝杠轴向运动。用滚珠丝杠螺母副传动结构代替原有传动结构,在综合性能上得到了较好的改善。
关键词:铣床,丝杠,步进电机,数控
The Economic Digital Control Retransformation of the Milling Machine X6132
Abstract
As the development of computer technology, producing the modern computer numerical control(CNC) machine becomes the trend of technique transformation and reformation in the manufacturing industry and the foundation of automation factories in the future. Therefore, the project of automating the machine is important to the prospective study and work.
The paper describes the digital control retransformation of X6132 miller and the introduction has been mainly underway by five branches. The introduction on computer numerical control (CNC) machine will be presented in Section 1. The overall designing scheme will be proposed in Section 2. The calculation and data of mechanical parts is in Section 3 and in Section 4 the economy is analyzed against the environmental protection performance profile. In section 5 is mechanical three-dimensional modeling. The reformation of the machine based on the stepping motor decreases the workload by turning the hand operation to electric control. Three motor controlling three directions respectively move the ball screws by gears and strap wheels. Replacing original drive composition with the ball leading screw nut pair drive composition can make the overall performance better improved.
Key words: milling machine, ball screw, stepping motor, computer numerical control
目录
1 绪论 1
1.1数控机床的发展 1
1.1.1 数控机床的历史和现状 1
1.1.2 数控机床的发展趋势 2
1.2 机床数控技术的概述 4
1.2.1 数控技术在机械制造业的应用 4
1.2.2 数控技术优越性 6
1.2.3 数控机床分类 7
您可能关注的文档
- (论文)模具冲压件厂车间单层门式钢架厂房设计.doc
- AZ31镁合金板状坯材挤压参数研究.doc
- 24m双跨单层钢结构装配车间设计计算书.doc
- IT机房搬迁实施方案.doc
- O2O旅游电子商务网站开发设计.doc
- SDH传输网-以宿迁市传输网组建与设计为例.doc
- QC小组成果-提高型钢混凝土柱与框架梁组合结构核心节点区连接合格率.doc
- SP预应力空心板施工技术.doc
- 搬运拖车移动机器人中英文资料外文翻译文献.doc
- 保税大厦AB座抹灰工程施工方案(8.19.doc
- 《GB/T 32151.42-2024温室气体排放核算与报告要求 第42部分:铜冶炼企业》.pdf
- GB/T 32151.42-2024温室气体排放核算与报告要求 第42部分:铜冶炼企业.pdf
- GB/T 38048.6-2024表面清洁器具 第6部分:家用和类似用途湿式硬地面清洁器具 性能测试方法.pdf
- 中国国家标准 GB/T 38048.6-2024表面清洁器具 第6部分:家用和类似用途湿式硬地面清洁器具 性能测试方法.pdf
- 《GB/T 38048.6-2024表面清洁器具 第6部分:家用和类似用途湿式硬地面清洁器具 性能测试方法》.pdf
- 《GB/T 18238.2-2024网络安全技术 杂凑函数 第2部分:采用分组密码的杂凑函数》.pdf
- GB/T 18238.2-2024网络安全技术 杂凑函数 第2部分:采用分组密码的杂凑函数.pdf
- 《GB/T 17215.686-2024电测量数据交换 DLMS/COSEM组件 第86部分:社区网络高速PLCISO/IEC 12139-1配置》.pdf
- GB/T 13542.4-2024电气绝缘用薄膜 第4部分:聚酯薄膜.pdf
- 《GB/T 13542.4-2024电气绝缘用薄膜 第4部分:聚酯薄膜》.pdf
文档评论(0)