IndustrialUltrasonicScanningSystemsforERW-克洛力有限公司.PDFVIP

克洛力有限公司 Industrial Ultrasonic Scanning Systems for ERW Pipe ERW 管工业超声扫查系统 AS-200e超声焊缝检测 克洛力有限公司 PRODUCT DESCRIPTION 产品描述 Introducing the AS-200e The AS-200e Series ‘Weld Inspector’ is intended for high-speed ultrasonic inspection of series longitudinal electrical resistance welded (ERW) pipe. Systems may either be installed AS-200e系列介绍 on-line directly after the welding head for quality control or offline for final evaluation of the product and quality assurance. AS-200e系列“焊缝检测”用于纵向ERW管的高速超声检测。系统可直接安装在在线焊 接系统中，用于质量控制，也可安装在离线系统，用于最终产品评估和质量保证。 Mechanics The mechanics may include a gantry or column supported multi-channel scan head with 机械 joint or individual probe activation. A wide degree of freedom is left for the user to design the coverage and inspection scheme. Known modes such as the I, K and X transmission modes are supported. 机械包括一整套架式或柱状用以支持多通道带关节或单独激活探头的扫查头。留给用户 很大自由度以设计扫查覆盖和检测计划。支持知名的模式例如“I”、“K”和“X ”传动 模式。 Ultrasonic transducers The RSA type probes, usually supplied with the system are available in a wide variety of 超声探头 beam angles, such as 45º, 60º, 70º, as well as costumed angles, with 2-5 MHz frequency. Different probes are used for the high temperature (online) and high resolution (offline) systems. For the inspection of the HAZ after the weld immersion probes with a squirter water jet are used, while for offline systems dual element co