Phoenix FD 2.2 for 3ds Max Help-凤凰插件.docVIP

Phoenix FD 2.2 for 3ds Max Help Simulation General Actions Parameters General This is the main panel controlling the simulation process, it is also used to display some statistical info like simulation times and the content of the cache file for the current frame. The content may be grid channels such as Temperature, Velocity, etc., and particle groups. You can choose the channels from the Output rollout, while the particle groups may be created by the PHXSource, or Splash and Foam sections. Actions Start, Pause, Stop?(MXS: A_StartSim, A_StopSim) - Start, pause and stop the simulation. Load Start (MXS: A_StartSim) - Start the simulation from the Start Frame the same way the Start act ion works, but first choose an *.aur cache as an initial state for the simulation. It may not have velocity or may not be suited for Restore. Restore (MXS: A_StartSim) - Continue a simulation from the current frame on the timeline. This can happen only when the full internal state of the simulation is exported (see the Backup Interval paramet er), Such frames display a text in the?Cache File Content?list saying? * Can Restore From Here. This command finds the latest frame containing full state and continues the simulation from there. Parameters Start Frame (MXS: startframe)?- Start frame of the simulation. Stop Frame (MXS: stopframe) - End frame of the simulation. Use Script (MXS: script, use_script) - Enables the use of MAXScript during the simulation. Press Edit.. to open a window with some skeleton code and a short description of the available commands (also, see Connection to MAXScript). Threads Limit (MXS: maxthreads) - Allows you to specify an upper limit for the number of threads used for the simulation. When the value is set to 0, the maximum number of threads (cores) will be used. NUMA Nodes - If your simulation is executed over a NUMA machine, you can specify which nodes will be used. Phoenix FD is very sensitive to the memory transfer and if all the nodes are use