foundry brocade-cisco cli命令行对照.doc

Foundry/Brocade Cisco common commands that are different between vendors: **access configuration** Access-list 10 permit 55 Access-list 10 permit 55 telnet access-group 10 line vty 0 4 ip access-class 10 in ip ssh-client snmp-client web-client all-client enable telnet password letmein line vty 0 4 password letmein enable super-user-password enable enable password enable enable secret enable **************** dns **************** Ip dns domain-name ip domain-name Ip dns name-server ip name-server ****************interface naming**************** Interface ether 1 interface e 1 Port-name test description test ****************speed-duplex**************** Interface ether 1 interface ether 1 Speed-duplex 100 full speed 100 Duplex full **************** disabling a port **************** Int e 1 int e 1 Disable shutdown **************** range of interfaces **************** Int Ethernet 1/1 to 1/24 interface range Ethernet 1/1 -24 **************** POE **************** Int Ethernet 1/1 interface Ethernet 1/1 Inline power power inline **************** ntp server **************** Sntp server ntp-server x.x.x.x ****************adding layer-3 interface**************** Interface ve 1 Interface vlan Ip address x.x.x.x x.x.x.x Ip address x.x.x.x x.x.x.x vlan 200 name test tagged ethe 3/22 router-interface ve 1 **Protocol based VLAN** Ip-subnet name subnet-a No dynamic Static Ethernet 1 to 9 ethernet 20 ****************port based vlans**************** vlan 222 name Test Vlan 222 name Test ****************adding port to vlan**************** Vlan 222 interface e 1/1 untagged ether 1/1 switchport access vlan 222 Untagged ether 1/1 ****************stp root**************** Spanning-tree priority 0 spanning-tree vlan 100 root primary/secondary **************** portfast-fastport **************** Int e 1/3 int e 1/3 Fast port-spa