hacmp安装总结.docVIP

Hacmp IY包下载地址： HYPERLINK /webapp/set2/sas/f/hacmp/download/aix53.html /webapp/set2/sas/f/hacmp/download/aix53.html 系统补丁包：bos.adt.* 1, .*1 ,bos.rte.*2 ,bos.clvm.*1,bos.perf.*1,bos.data.*1, bos.acct.*2,bos.dlc.*3,bos.dosutil.*1,rsct.basic.*1,pat.*3,pat.client.*1,rsct.opt.storagerm 2. Ha5.4 sp2 laster fix IY97391 Sp1 bast fix IY87247 Ha5.3 sp6 laster fix IY07791 Sp5 laster fix IY94307 Sp4 laster fix IY84883 做并发的HACMP得打 bos.clvm.enh 包 解析文件：/etc/hosts(5 node1_boot1 node1 5 node1_boot2 6 node2_boot1 node2 6 node2_boot2 5 node1_svc 6 node2_svc) /usr/es/sbin/cluster/etc/rhosts(ha同步时用5 5 6 6) 脚本：cd /hademo ls -l(start.sh stop.sh权限为可执行:rwxr-xr-x)cat start.sh(date start.date) 配置共享盘：node1上建完VG后varyoffvg datavg 建VG过程smitty mkvg:1 datavg 2 PHYSUCAL VILUME names hdisk1 3 Activate volume group (no) node2上importvg -y datavg hdisk1 1 lsvg 2 smitty chvg :datavg Activate volume no,A QUNKOU of disk no. 3 varyoffvg datavg 4 lspv 创建fs:node1上1varyonvg datavg 2smitty mkjfs(mount点/demofs) 3varyoffvg datavg node2上1 exportvg datavg 2 importvg -y datavg hdisk1 3 smitty chvg(1 A QUORUM of disks required to keep the volume group on-line no 2 Activate volume group AUTOMATICALLY no) 4 lsvg -l datavg 5 varyoffvg datavg 创建tty设备：node1和node2上做同样的动作1 lsdev -C|grep tty 2 smitty tty 3 port num 0 4 Flow CONTROL to be used (rts) 5 测试tty网络:在node1和node2上输入stty /dev/tty0 smitty hacmp 一加节点New Nodes(via selected commuication选两节点的 boot1) 二1 configure Resources to make Highly Available 2 configure service ip lables/address ip label/address [Node1_svc][Node2_svc]双机互备时使用