003-吊装作业hoisting work JHA.docVIP

Shell (shanghai) RD Center Project 壳牌（上海）技术有限公司研发中心项目 hoisting work（JHA） 吊装施工作业JHA） 编号：—003 Doc No. Qi An --003 吊装施工作业 work/JHA No.序号 施工活动Construction activities 潜在危险 Latent hazards 主要后果 Main consequences Grade of hazards 具体控制措施 Specific control measures 1 Staff training 未经安全培训 failure to go through safety induction 错误信息导致人员伤害 false information causing personal injury P3 吊装工作和设备维护应由起重工负责，起重工入场前申请安全培训，熟悉安全程序和规定，正确佩戴个人PPE，持本人胸卡进出指定厂区； Lifting work and equipment maintenance shall be in the charge of riggers. Before entering site, riggers shall submit the lifting conduction license to management for safety induction and get familiar with safety procedures and rules, properly wear PPE and enter/leave designated area with badge on. 未经教育failure to be educated 侥幸心理导致事故发生 trusting-to-luck mentality causes accidents to happen P3 起重工经过专业安全培训，早班会教育和安全交底，加深对作业现场风险识别和控制办法的印象，未经培训的人员禁止入场，否则，可能因缺乏吊装知识造成事故的发生。Riggers must go through professional safety induction by management. At the tool box meeting they shall be educated and clarified on safety requirements before work commences every morning, through which they can be left a deeper impression on identification of hazards on site and controlling measures. Riggers not educated and trained by management are not allowed to enter site ,or it may lead to accidents due to lack of lifting knowledge. 2 设备验收Check and Acceptance of equipments 未经验收设备进入现场施工，可能导致事故的发生Equipments not checked and accepted working on site may lead to accidents 机械伤害 mechanical injury P2 吊装作业属于高危风险作业，必须要有良好的吊车设备，吊车进场必须申请安全验收，验收合格的贴标进场，每日检查，确保设备始终处于良好工作状态；吊车设备坚持每月检查，配合实行贴标程序，未经验收的吊车设备禁止入场，否则，未经验收的设备进入现场作业，可能导致事故的发生。Lifting work belongs to work with high risks and hazards and must be executed with sound cranes. Before entering site, cranes must be checked and accepted by the management by application. Submit the qualification certificate, annual test report, insurance certificate, valid operation permit of the operator. Those found qualifi